產品明細

MU-FXHD-KIT

可攜式HDMI檢測儀

產品簡述

♦ 支援18Gbps Bandwidth, 4K & HDR測試
♦ 提供18Gbps Cable測試
♦ HDCP & EDID 測試
♦ 支援FULL HDR, HDR10+, and HLG
♦ 內建電池, 攜帶方便

詢價

產品詳細介紹Product Introduction

MU-FXHD-KIT

The Fox & Hound Testing and Troubleshooting Kit: A 4K UHD & HDR Generator and Analyzer by Murideo

This 18Gbps Generator and Analyzer Testing Kit was built as the ideal testing unit for all custom and commercial integrators. The Fox & Hound Test Kit comes with an 18Gbps Generator and 18Gbps Analyzer. these tools allow you to confirm correct bandwidth, HDCP, resolution, timing, HDR metadata and many more options that could cause system hiccups if not treated correctly. The Fox & Hound Kit is a product that can produce and analyze the newest and highest resolutions - 4K60 at 18Gbps. It’s also affordable enough for every integrator to have on any install/service call!

Sure, there are pricey test instruments available with a multitude of features, most of which the average integrator is not going to use. That is why we set out to develop a simple, affordable solution to troubleshoot system issues. The Fox & Hound: A/V Testing and Troubleshooting Kit is a product that can produce and analyze the newest and highest resolutions - 4K60 at 18Gbps. It’s also affordable enough for every integrator to have on any install/service call!

How it works:

Place the generator in place of your source, and set the analyzer in place of your sink. These units will then read the data being sent throughout the system. The Fox & Hound can run any type of signal through the unit and confirm that same signal is being passed through the product with no changes. This will diminish calls to support and replacement of products! Troubleshooting is a breeze—never worry if a cable or extender is bad, again! Not to mention, it’s fast—have your answer to a potential problem in less than a minute.

Features

Generator:

Generate video signals up to 18Gbps with backwards compatibility. This gives you the ability to emulate any active content available
Test any display, repeater, or the system's infrastructure for HDR compatibility at the push of a button
Test cables before, during, or post installation to ensure bandwidth and functionality
Mimic any available source to ensure compatibility with any sink device. No need to carry a source for testing
Allows you to test a sink device or the entire system for HDCP compatibility
Test up to 8ch audio to ensure that audio is playing throughout the system
Easily identify 5v and that HDCP is present, eliminating guesswork
Bright, easy to read display
Portable and lightweight. No need to be tethered to a power outlet

Analyzer:

View live video signals up to 18Gbps ensuring that sources and repeaters are working throughout the signal chain
View video format information to ensure that a source or repeater device is sending out the correct video signal, up to 18Gbps
Verify that HDR is present on HDR capable devices, no more guesswork
Ensure that an HDMI or DVI cable is funtional and passing the desired bandwidth. Check 5V, Hot Plug Detect, TMDS, and the DDC channel of the cable
Read or emulate EDID on any repeater or sink device during system setup or troubleshooting. No more guessing on what the EDID is
Analyze any version of HDCP to ensure compliance of a source or repeater device
Verify audio signals up to 8ch and analyze channel levels in real time
Bright, easy to read display
Portable and lightweight. No need to be tethered to a power outlet

Specification

Specifications in brief
VIDEO
HDMI VERSION	HDMI 2.0
HDCP VERSION	HDCP 2.2 and 1.4
HDCP ON/OFF	YES
Maximum Clock Rate	600 Mcsc (594 MHz)
Maximum Throughput Per Channel	6.0 GBITS/Sec (18 GBP/Sec TOTAL)
Resolution Timings	VESA; Video Standard with 60, 59.94, 30, 29.97, 24, 23.98, FPS; Video Standard with 50, 25 FPS; Auto and 10 User Definded
Video Encoding	RGB, YCbCr
Video Sampling Models	RGB 4:4:4, YUV 4:4:4, YUV4:2:2, YUV 4:2:0 HDMI 2.0
Color Bit Depth	8, 10, 12, 16, and Audio EDID READ
AUDIO
AUDIO Channels	UP TO 8 (7.1)
AUDIO Output	2 CH LPCM
VU METER Channels	UP TO 8 (7.1)
PORTS
HDMI	TYPE A
FIRMWARE	MINI USB
ENVIRONMENTAL
Operating Temprature	23 to 125°F (-5 to 51°C)
Storage Temperature	-4 to 140°F (-20 to 60°C)
Humidity Range	5-90% RH (No Condensation)
POWER
POWER (Single Unit)	7.4V 2600 MAH Internal Battery or Wall Adapter
POWER Consumption (Total for Single Unit)	7.5 Watts Max
Power Supply (x2)	Input: AC 100-240V ~ 50/60HZ Output: DC 5V 3A
Dimensions
Dimensions (Single Unit only D/W/H)	MM: 30.25 X 78.4 X 135 Inch: 1.19 x 3.09 x 5.31
Weight (Single Unit)	0.8 LBS/0.36 KG

*Specifications Subject to Change without Notice. Mass & Dimensions are approximate