產品明細

ZPH

傳輸電纜與天線分析儀

    產品簡述
    ♦ 頻率範圍: 2MHz~3GHz/4GHz
    ♦ 單埠機型(model .02)支援功能: DTF, Return Loss, VSWR and Cable loss measurements
    ♦ 雙埠機型(model .12)附加功能: S21 measurements, Spectrum and Interference analysis, AM/FM/ASK/FSK demodulation
    ♦ 量測速度: 0.3ms/point
    ♦ 內建長效電池, 續航時間9小時
    ♦ 重2.5kg, 攜帶方便
      詢價

      產品詳細介紹Product Introduction

      The R&S®CableRider ZPH has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field. Its unique features ensure fast and efficient cable and antenna measurements and spectrum analysis. The easy-to-use analyzer features a touchscreen and large keypad designed for field use.

      With its short boot and warm-up times and fast measurement speed, the R&S®CableRider ZPH gets down to analyzing extremely fast. Measurement setups can be predrawn and settings preconfigured. Thanks to the wizard function, fast and accurate measurements are performed in a single step. Generating measurement reports is easy with the R&S®InstrumentView software.

      There is no need to calibrate the analyzer before use. It is reliably and accurately calibrated before leaving the factory. Should calibration be needed to eliminate the effects of additional cables or adapters used to connect the analyzer to the device under test (DUT), the R&S®ZN-Z103 automatic calibration unit performs the calibration in just one step. Backlit keypad for operation in dim environments.

      The battery lasts up to an entire work day on just one charge. The keypad is illuminated to facilitate working in dim environments. The leading-edge capacitive touchscreen of the R&S®CableRider ZPH is changing the way users interact with an analyzer – simply touch the screen to add markers and change settings. These features and the ergonomic design make the R&S®CableRider ZPH ideal for fast and efficient on-site measurements.

      Two different R&S®ZPH models are available to suit different needs, a pure one-port cable and antenna analyzer and a two-port model with additional spectrum analysis and tracking generator features.

      Features
      • Frequency range in cable and antenna analyzer mode from 2 MHz to 3 GHz or 4 GHz, upgrade via keycode
      • Frequency range in spectrum analyzer mode from 5 kHz to 3 GHz or 4 GHz, upgrade via keycode
      • One-port model features: DTF, return loss, VSWR and cable loss measurements
      • Two-port model additionally features:
        • Two-port transmission measurement
        • Spectrum analysis
        • Interference analysis
        • Signal strength mapping
        • Modulation analysis
      • Ideal for field use: up to 9-hour battery life, 2.5 kg (5.5 lb), backlit keypad, fast boot time, non-reflective display, small form factor, ruggedized housing (IP51)
      • Large color touchscreen
      • Measurement wizard to speed up measurements and eliminate human errors
      • Easy and cost-efficient upgrades of all options via software keycode

      Specifications in brief
      Frequency rangeR&S®CableRider ZPH (one-port model .02)2 MHz to 3 GHz
         with R&S®ZPH-B4 option2 MHz to 4 GHz
      R&S®CableRider ZPH (two-port combi model .12)
         with R&S®ZPH-K1 option5 kHz to 3 GHz
         with R&S®ZPH-B4 and R&S®ZPH-K1 options5 kHz to 4 GHz
      Frequency resolution1 Hz
      Spectrum measurement with combi model .12 only, with R&S®ZPH-K1 option
      Spectral purity, SSB phase noisef = 500 MHz, carrier offset 30 kHz< –88 dBc (1 Hz), typ. –95 dBc (1 Hz)
      f = 500 MHz, carrier offset 100 kHz< –98 dBc (1 Hz), typ. –105 dBc (1 Hz)
      f = 500 MHz, carrier offset 1 MHz< –118 dBc (1 Hz), typ. –125 dBc (1 Hz)
      Displayed average noise level (DANL)0 dB RF attenuation, termination 50 Ω, RBW = 1 kHz, VBW = 10 Hz, sample detector, log scaling, normalized to 1 Hz
      frequency preamplifier = off
         1 MHz to 10 MHz< –130 dBm, typ. –135 dBm
         10 MHz to 1 GHz< –142 dBm, typ. –146 dBm
         1 GHz to 4 GHz< –140 dBm, typ. –144 dBm
      frequency preamplifier = on
         1 MHz to 10 MHz< –150 dBm, typ. –160 dBm
         10 MHz to 3 GHz< –158 dBm, typ. –163 dBm
         3 GHz to 4 GHz< –156 dBm, typ. –161 dBm
      Individual measurementsreflection (S11), one-port cable loss, distance-to-fault
      Port output power controlled via tracking generator attenuation–10 dBm (nom.)
      Maximum permissible spurious signal measurement = reflection (S11)/one-port cable loss/distance-to-fault analysis+17 dBm (nom.)
      Data pointsSelectable101 to 2501
      Reflection measurement S11
      Corrected directivity with R&S®ZN-Z103 option2 MHz ≤ f ≤ 4 GHz (with R&S®ZPH-B4 option)> 42 dB (nom.)
      Measurement speed0.3 ms/point
      Result formatsmagnitude, VSWR, magnitude and distance-tofault, VSWR and distance-to-fault
      One-port cable loss measurement
      Result formatmagnitude
      RangeSelectable1/2/5/10/20/50/100/120/150 dB
      Distance-to-fault analysis
      Result formatsreturn loss (dB), VSWR
      Fault resolution1.5 m × 108 m × velocity factor/span
      Maximum cable lengthdepending on cable loss1500 m (nom.)
      Maximum rated input levels
      DC voltage50 V
      CW RF power model .02: port 1 (power meter input)30 dBm
      model .12: port 1 (RF input)20 dBm
      port 2 (reflectometer input)23 dBm
      General data
      Display resolution WVGA800 × 480 pixel
      Battery (R&S®HA-Z306 option)Capacity72 Wh
      Voltage11.25 V (nom.)
      Operating time with new, fully charged batteryone-port model .029 h
      two-port combi model .12, spectrum analyzer mode9 h
      two-port combi model .12, cable and antenna analyzer mode6.5 h
      DimensionsW × H × D202 mm × 294 mm × 76 mm
      (8.0 in × 11.6 in × 3 in)
      Weight2.5 kg (5.5 lb)
      TOP