產品明細

HMC8015

功率分析儀

產品簡述

♦ 用於交流/直流負載電流及待機電流的特性量測
♦ 符合IEC62301, EN50564, 以及EN61000-3-2的性能和一制性協定
♦ 基本精確度: 0.05%
♦ 頻寬範圍: DC ~ 100kHz
♦ 功率範圍: 50uW ~ 12kW
♦ 取樣率: 500ksample/s

詢價

產品詳細介紹Product Introduction

The R&S®HMC8015 Power analyzer is a compact tester for AC/DC load and standby current characterization that enables measurements without additional tools such as a computer or remote infrastructure. In addition to a numerical and graphical display with 26 key parameters, the instrument delivers performance and compliance protocols in line with IEC 62301, EN 50564 and EN 61000-3-2.

Features

Power measurement range: 50 µW to 12 kW
Analog bandwidth: DC to 100 kHz
Sampling rate: 500 ksample/s
Basic accuracy: 0.05 %

Specifications

Specifications in brief
Analog bandwidth		DC to 100 kHz
Frequency accuracy		0.1% of reading
A/D converter resolution	voltage and current	16 bit
Basic accuracy		0.05% of reading
Display resolution		5 digits, 10 updates/s
Sampling frequency		500 kHz
Input impedance		2 MΩ
PLL synchronization sources		U, I, external
Filters
Analog signal filter		1 kHz
Digital filter	depends on measurement frequency	adaptive filter
Frequency filter	independent of analog signal filter	500 Hz
Additional inputs/outputs		BNC, rear panel
Analog input		±10 V (U peak)
Analog input accuracy		0.5% of reading
Analog output		±5 V (U peak)
Digital input
Limits (PASS/FAIL)	bandwidth	100 kHz
	PWM	1 kHz
	state	≤ 10 Hz
Signal threshold	logical zero	0 V to 2 V
	logical one	3 V to 24 V
Digital output	up to 100 mA source/sink	5 V, TTL
Display		8.9 cm (3.5") TFT (color)
	Resolution	320 × 240 pixel (QVGA)
Network connection	AC	100 V to 115 V/230 V at 50 Hz to 60 Hz
Power consumption		max. 35 W, typ. 15 W
Operating temperature range		+5°C to +40°C
Storage temperature range		–25°C to +60°C
Standards		CAN/CSA-C22.2 NO. 61010-1, UL 61010-1, DIN EN61010-1, DIN EN61326-1, DIN EN55011
Common mode voltage		CAT II, 600 V (U RMS)
Dimensions		222 mm × 88 mm × 280mm (8.74 in × 3.46 in × 11.02 in)
Weight		approx. 3.25 kg (7.16 lb)
Warm-up time		60 min

All specifications refer to a sine reference signal, PF = 1, voltage to ground = 0 V, analog filter
deactivated, digital filters activated and are valid for measurement values > 1% of measurement range.