產品明細

RT-ZS10 Single-Ended Broadband Probes

單端寬頻探棒

    產品簡述
    ♦ 頻寬: 1GHz
    ♦ 衰減係數: 10:1
    ♦ 輸入阻抗: 1 MΩ || 0.8 pF
    ♦ 動態範圍: ±8 V (±12 V offset compensation)
      詢價

      產品詳細介紹Product Introduction

      SINGLE-ENDED BROADBAND PROBES
      Wide dynamic range: ±8 V, expandable with additional offset compensation of ±12 V (±10 V for R&S®RT-ZS60) A particularly wide dynamic range, exceptionally low offset and gain errors and the right accessories make these probes the ideal accessory for Rohde&Schwarz oscilloscopes.

      High signal fidelity with active probes
      Single-ended active probes are used to accurately measure ground-referenced signals. They precisely measure both high-speed and low-frequency signals for which it is critical that the probe impedance places only a minimal load on the test point. Rohde&Schwarz offers a variety of models with a maximum bandwidth up to 6 GHz. Rohde&Schwarz single-ended active probes feature a high input impedance of 1 MΩ, a low input capacitance down to 0.3 pF and noise down to 2 mV (RMS) referenced to the input.

      Wide dynamic range with additional offset compensation
      In addition to the wide dynamic range, Rohde&Schwarz single-ended active probes also offer an offset compensation. As a result, the DC component of the measured signal can be compensated so that the signal components of interest are displayed on the oscilloscope at maximum resolution. The maximum input voltage of 30 V ensures that the probe is not damaged by overloads. A low voltage, single-ended probe is typically used for measuring high-speed, ground-referenced signals up to 12 V.

      Exceptionally low offset and gain errors, minimal temperature drift
      Rohde&Schwarz single-ended active probes are characterized by impressively low offset and gain errors. The minimal gain drift coupled with the offset compensation permits precise measurements – even over extended periods of time and at varying temperatures. Frequent compensation during the measurement is no longer necessary, simplifying everyday measurement tasks.



      Accessories for high signal fidelity
      All Rohde&Schwarz single-ended active probes come with high-quality accessories. The R&S®RT-ZS60, for example, includes signal and ground solder-in pins and probe tips. Its design enables test point contacting with particularly low input capacitance.

      Rohde&Schwarz probe interface extension set
      When the R&S®RT-ZA50 and R&S®RT-ZA51 adapters are combined, they serve as an extension set for the Rohde&Schwarz probe interface. This allows Rohde&Schwarz probes to be operated at greater distances from oscilloscopes for production testing and ATE systems.



      ModelBandwidthAttenuation factorInput impedanceDynamic RangeComment
      Prboes
      R&S®RT-ZS10L 1 GHz10:11 MΩ || 0.9 pF±8 V BNC interface , 50 Ω output
      R&S®RT-ZS10E 1.0 GHz 10:1 1 MΩ || 0.8 pF ±8 V Rohde&Schwarz probe interface
      R&S®RT-ZS10 1.0 GHz 10:1 1 MΩ || 0.8 pF±8 V (±12 V offset compensation)R&S®ProbeMeter and micro button for instrument control, Rohde&Schwarz probe interface
      R&S®RT-ZS201.5 GHz10:11 MΩ || 0.8 pF±8 V (±12 V offset compensation)R&S®ProbeMeter and micro button for instrument control, Rohde&Schwarz probe interface
      R&S®RT-ZS303.0 GHz10:11 MΩ || 0.8 pF±8 V (±12 V offset compensation)R&S®ProbeMeter and micro button for instrument control, Rohde&Schwarz probe interface
      R&S®RT-ZS606.0 GHz10:11 MΩ || 0.8 pF±8 V (±10 V offset compensation)R&S®ProbeMeter and micro button for instrument control, Rohde&Schwarz probe interface
      Accesories
      R&S®RT-ZA2 accessory set for R&S®RT-ZS10/20E/20/30 1
      R&S®RT-ZA3 pin set for R&S®RT-ZS10/10E/20/30
      R&S®RT-ZA4 mini clips
      R&S®RT-ZA5 micro clips
      R&S®RT-ZA6 lead set
      R&S®RT-ZA9 N(m) adapter for R&S®RT-Zxx oscilloscope probes
      R&S®RT-ZA50 adapter, Rohde&Schwarz probe interface to 2.92 mm/3.5 mm/SMA
      R&S®RT-ZA51adapter, 2.92 mm/3.5 mm/SMA to Rohde&Schwarz probe interface
      TOP