產品明細

RT-ZM60 Modular Broadband Probes

模組寬頻探棒

    產品簡述
    ♦ 頻寬: 6GHz
    ♦ 上升時間(10% 90%): <75ps
      詢價

      產品詳細介紹Product Introduction

      MODULAR BROADBAND PROBES

      Addressing high-speed probing challenges
      The R&S®RT-ZM modular probe system addresses today’s probing requirements with a technically sophisticated yet easy-to-handle solution. The various probing solutions meet the demands for high probing bandwidth and dynamic range in conjunction with the need for low capacitive load. Examples include semi-permanent solder-in probe tips for physically small probing areas or a solution for environmental tests in climatic chambers at temperatures from –55°C to +125°C.

      The R&S®RT-ZM modular probe system delivers high performance in combination with flexible and configurable connectivity. The system includes probe tip modules for various measurement tasks and conditions. These modules can be connected to amplifier modules with bandwidths ranging from 1.5 GHz to 16 GHz. The modular probe system also offers multimode functionality, enabling users to switch between different measurement modes. The integrated R&S®ProbeMeter functionality makes it possible to perform high-precision DC voltage measurements at the same time.

      R&S®RT-ZM probe amplifier modules
      The R&S®RT-ZM modular probe system is available with amplifier modules offering bandwidths from 1.5 GHz to 16 GHz. These modules come with a Rohde&Schwarz probe interface that allows automatic probe detection and configuration on Rohde&Schwarz oscilloscopes. The amplifier is equipped with a miniaturized high-quality and high-frequency coaxial double-socket SMP connector for flexible snap-on use with various probe tips modules (see figure on next page).

      The SMP connector on the amplifier is specially designed for a bandwidth from DC to 26.5 GHz. It offers minimum return loss and ensures high repeatability for many connect/disconnect cycles. The double-socket SMP connector has built-in connector alignment to safeguard the connection between the probe amplifier module and the probe tip modules to provide highly repeatable signal transmission conditions.




      ModelSystem bandwidthRise time (10% to 90%)MultimodeComment
      Probe Amlifier modules
      R&S®RT-ZM15 > 1.5 GHz < 230 ps
      R&S®RT-ZM30 > 3 GHz < 100 ps
      R&S®RT-ZM60 > 6 GHz < 75 ps
      R&S®RT-ZM90 > 9 GHz < 50 ps
      R&S®RT-ZM130 > 13 GHz < 35 ps
      R&S®RT-ZM160 16 GHz < 28 ps
      Probe tip modules
      R&S®RT-ZMA10 16 GHz (meas.) 28 ps P/N/DM/CM length: 15 cm (5.9 in), suitable for R&S®RT-ZMA50
      R&S®RT-ZMA10-6 set of 6 R&S®RT-ZMA10 solder-in probe tip modules
      R&S®RT-ZMA11 16 GHz (meas.) 28 ps P/N/DM/CM length: 15 cm (5.9 in)
      R&S®RT-ZMA12 6 GHz (meas.) 75 ps P/N/DM/CM length: 15 cm (5.9 in)
      R&S®RT-ZMA14 16 GHz (meas.) 28 ps P/N/DM/CM length: 15 cm (5.9 in), incl. 10 solder-in flex tips
      R&S®RT-ZMA15 12 GHz (meas.) 37 ps P/N/DM/CM length: 15 cm (5.9 in)
      R&S®RT-ZMA30 16 GHz (meas.) 28 ps DM
      R&S®RT-ZMA40 16 GHz (meas.) 28 ps P/N/DM/CM 50 Ω/100 Ω, suitable for SMA, 3.5 mm and 2.92 mm systems, termination voltage ±4 V, supplied from R&S®RT-ZM probe amplifier module
      R&S®RT-ZMA50 12 GHz (meas.) 37 ps P/N/DM/CM cable length: 1 m (39.37 in); consists of R&S®RT-ZMA11 and a pair of matched extension cables, temperature range: –55°C to +125°C
      Accessories
      R&S®RT-ZMA1 for up to 6 R&S®RT-ZMAxx probe tip modules
      R&S®RT-ZAP 3D probe positioner
      R&S®RT-ZF30 test fixture for probe characterization with R&S®RTP-B7
      TOP