產品明細

RT-ZC20B Current Probe

電流探棒

    產品簡述
    ♦ 頻寬: 100MHz
    ♦ 感度: 0.1 V/A
    ♦ 動態範圍: 30 A (RMS), ±50 A (peak)
    ♦ 上升時間: 3.5 ns
      詢價

      產品詳細介紹Product Introduction

      CURRENT PROBES
      Rohde&Schwarz current probes enable accurate, non-intrusive measurement of DC and AC currents. Different models are available to measure currents in the range of 1 mA to 2000 A with a maximum bandwidth of up to 120 MHz.

      DC and AC measurements without circuit interruption
      The R&S®RT-ZC current probes precisely measure direct and alternating current without interrupting the power circuit for the measurement. The extra-large opening on the R&S®RT-ZC10 accommodates conductors of up to 20 mm in diameter. The R&S®RT-ZC10 can measure peak currents up to 300 A (500 A for a single pulse). When measuring low-amplitude, high-frequency currents, the more compact R&S®RT-ZC20 with a measurement bandwidth of 100 MHz is ideal.

      The R&S®RT-ZC31 allows switching between three different sensitivity ranges to cover a very broad dynamic range with high bandwidth.

      Robust design and easy operation
      Rohde&Schwarz current probes are characterized by their robust design and easy operation. The degauss and offset correction is performed directly at the probe connector. The compact R&S®RT-ZA13 probe power supply supplies up to four current probes. The current probes can be selected as predefined probes on the R&S®RTO, R&S®RTE, R&S®RTM and R&S®RTA oscilloscopes.





      Easy deskewing for simultaneous current and voltage measurements
      For meaningful measurements on power electronics, there must be no time delay (skew) between the current and the voltage measurements. The R&S®RT-ZF20 power deskew and calibration test fixture provides a variety of test signals that can be used to easily compensate for skew between Rohde&Schwarz current and voltage probes. Power to the power deskew and calibration test fixture is supplied via the oscilloscope's USB port.



      ModelBandwidthSensitivityDynamic rangeRise timeComment
      Probes
      R&S®RT-ZC02 20 kHz 0.01 V/A, 0.001 V/A ±200 A, ±2000 A 5 µs battery powered
      R&S®RT-ZC03 100 kHz 0.1 V/A 20 A (RMS), ±30 A (peak) 1 µs battery powered
      R&S®RT-ZC05B 2 MHz 0.01 V/A 500 A (RMS), 700 A (peak) 175 ns power supply via Rohde&Schwarz probe interface
      R&S®RT-ZC10 10 MHz 0.01 V/A 150 A (RMS), ±300 A (peak), ±500 A (peak) (single pulse)35 ns power supply via R&S®RT-ZA13
      R&S®RT-ZC10B 10 MHz 0.01 V/A 150 A (RMS), ±300 A (peak), ±500 A (peak) (single pulse)35 ns power supply via Rohde&Schwarz probe interface
      R&S®RT-ZC15B 50 MHz 0.1 V/A 30 A (RMS), ±50 A (peak) 7 ns power supply via Rohde&Schwarz probe interface
      R&S®RT-ZC20 100 MHz 0.1 V/A 30 A (RMS), ±50 A (peak)3.5 ns power supply via R&S®RT-ZA13
      R&S®RT-ZC20B 100 MHz 0.1 V/A 30 A (RMS), ±50 A (peak)3.5 ns power supply via Rohde&Schwarz probe interface
      R&S®RT-ZC30 120 MHz 1 V/A 5 A (RMS), 7.5 A (peak) 2.9 ns power supply via R&S®RT-ZA13
      R&S®RT-ZC31 120 MHz 0.1 V/A, 1 V/A, 10 V/A 30 A (RMS), 5 A (RMS), 0.5 A (RMS) 2.9 ns power supply via R&S®RT-ZA13
      Accessories
      R&S®RT-ZF20 power deskew and calibration test fixture
      R&S®RT-ZA13 external power supply for up to four Rohde&Schwarz current probes
      TOP