產品明細

PG-1000 脈波產生器

    產品簡述
    ♦ 最多支援4通道
    ♦ Rise/Fall time (20%~80%) <70ps
    ♦ 輸出電壓位準調整範圍: 10mVpp ~ 5Vpp
    ♦ 基準電壓Offset ± 2.5 V
    ♦ 每個通道最大頻率: 800 MHz
    ♦ 脈波寬度: 300ps ~ >1s; 解析度: 10ps
    ♦ 脈波輸出方式: continuous, single, burst, gated, external trigger
    ♦ Trigger in to output jitter < 35ps RMS
    ♦ 具備時鐘源輸入與輸出功能, 方便信號同步應用
     
      詢價

      產品詳細介紹Product Introduction

      PG-1000 FAST RISE TIME PULSE GENERATOR

      Picosecond Pulse Generator

      The Pulse Rider Series includes a set of fast rise time pulse generators, that offer premium signal integrity with the easiest to use touch screen display interface (SimpleRider™), that allows pulse creation in few screen touches.

      The signal output Voltage can be adjusted up to 5 Volts pk-pk in a window of ±5 Volts with 70 ps edge rate.

      The powerful architecture provides the possibility to generate advanced pulse sequences, such as double pulse or quad pulse, with fully independent timing parameters. The maximum repetition rate of Pulse Rider Pulse Generator is 800MHz and the minimum pulse width is 300 ps @ 5V

      Take a look to the video below to see how to create a sub-nano second pulse, or download the full documentation in the doc section below, to learn more.


      Models

      ModelsNo. of ChannelsRise/Fall Time (20%-80%)AmplitudeBaseline OffsetPulse Width
      PG-10722<70ps fixed0 to 5Vpp± 2.5 V Adj300 ps to > 1 s
      PG-10744<70ps fixed0 to 5Vpp± 2.5 V Adj300 ps to > 1 s

      High-Performance Pulses for Your Tests

      Whether it is generating a complex pulse train, a series of radar pulses, pulses for Advanced Research, laser and optical experiments and semiconductor tests, the PG-1000 is the ideal partner for all your most complex tests and cutting-edge applications.

      Highlights

      • 70 ps Rise and Fall Time (symmetrical)

      • Up to 5Vpp into 50 Ohm Pulse Amplitude with ± 2.5V hardware offset

      • Minimum Pulse Width: 300 ps

      • Jitter RMS: 4 ps

      • 800 MHz Repetition Rate


      Multiple Pulses

      You can combine multiple pulses together to obtain double, triple and quadruple pulses that are very useful in semiconductor testing, radar design and laser/optical experiments. Using this feature you can create clock-like signals with frequencies up to 800 MHz.

      Highlights

      • Double, triple and quadruple pulse mode

      • Up to 800 MHz frequency

      • Semiconductor test, radar, lidar and laser application


      Radar Design and Testing

      Active Technologies Pulse Rider PG-1000 Series pulse generators allow creating pulses with different pulse width, repetition rate and amplitude easily using the graphical interface and the touch screen display.
      Following this solution, it is possible to save the time to develop the pulse system and concentrate the efforts on the radar design and test goals.

      Highlights

      • Easy to use Simple Rider User Interface

      • Simplify tour Radar design and testing

      • Primary radar and secondary radar pulse generation and multiple target simulation


      Semiconductor Applications

      Newer technologies applied on the Non-Volatile RAM require faster pulses every day: Active Technologies Pulse Rider with transition time under 70 ps, an amplitude up to 5 Vpp, and a time resolution of 10 ps combined to the vertical resolution of 10 mV is the perfect choice for those kinds of requirements.

      Developing modern MOSFET transistor, the challenge is to use high κ material for the dielectric in MOS capacitor, this give the advantage of reduce the leakage current through the isolator but at the same time, it causes some problem due to charge trapping. Short and Slow Pulses tests are fundamental techniques to study those kinds of problems.

      The Active Technologies Pulse Rider PG-1000 Series pulse generators supply fast edges under 70 ps, a baseline offset of +-2.5 V and a pulse width from 300 ps up to 1 s, so it may be the ideal instrument to generate the pulses for Short and Slow Pulse tests.

      Highlights

      • Non-Volatile Memory Cells Characterization

      • Mosfet Test

      • Short, Slow and Narrow Pulses tests


      Electro Optics Modulator Applications

      An electro optics modulator (EOM) is a device which can be used for controlling the power (→ intensity modulators), phase (→ phase modulators) or polarization of light with an electrical control signal.
      It is important to use an electronic driver which is both well matched to the EOM and suitable for the particular application. For example, different kinds of EOMs require different drive voltages.

      The PG-1000 Series Pulse Generator allows designing and testing new Electro-Optic Modulators that typically require higher voltages and narrower pulses as control signals; the PG-1000 can deliver up to 5 Vpp of pulse amplitude combined with a very narrow pulse of 300ps and an high repetition rate of 800 MHz.

      Highlights

      • Electronic driver for Electro-optic modulator

      • Multi-instrument synchrnonization


      Advanced Research Applications

      In big physics experiments, photomultipliers are fundamental since they allow to convert photons in electric charge that can be received by the acquisition system allowing the detecting photons.Using Active Technologies Pulse Rider PG-1000 Series pulse generators it is possible to generate a pulse with different width, period and amplitude used as a Laser Driver signal.

      A klystron is a specialized linear-beam vacuum tube that can be used in multiple applications, as example in the colliders used for big physics experiments, it has the purpose to generate the particles that will collide.

      Like for the laser applications, it is necessary to generate an enable signal to drive the klystron. The  Pulse Rider PG-1000 Series pulse generators offer an off-the-shelf solution to control and modify the klystron enable signal parameters in an easy way using the graphical interface and the touch screen display.

      Highlights

      • Advanced Research and Big Physics applications

      • Laser drivers, klystron drivers

      • Easy to use graphical interface

      • Multi-instrument synchrnonization

      Specifications

       Pulse Rider PG - 1072Pulse Rider PG - 1074
      Number of Analog Channels24
      Timing specifications
      Pulse Period
      Range (spec.)
      		5 ns to 8 sec.
      Resolution (spec.)
      		10 ps
      RMS jitter 1 (Integration Range 100 Hz to 10 MHz, Fout = 200 MHz )
      		4 ps
      Pulse Frequency
      Range (spec.)
      		0.125 Hz to 200 MHz (Single pulse mode)
      0.25 Hz to 400 MHz (Double pulse mode)
      0.375 Hz to 600 MHz (Triple pulse mode)
      0.5 Hz to 800 MHz (Quadruple pulse mode)
      Accuracy
      		± 2 ppm max
      Pulse Width
      Range (spec.)
      		300 ps to (period – 300 ps)
      Resolution (spec.)
      		10 ps
      Accuracy
      		± (0.1 % + 30 ps)
      RMS jitter 1
      		< 10 ps
      Pulse Delay(single/double/triple/quadruple)
      Range (spec.)
      		0 ps to period
      Resolution (spec.)
      		10 ps
      Accuracy
      		± (0.1 % + 100 ps)
      Output specifications (50 Ohm load)
      Impedance
      		50 Ohm nominal
      Amplitude
      Range pk-pk (spec.)
      		10 mVpp to 5 Vpp
      Absolute accuracy (spec.)
      		± (1% of amplitude pk-pk + 1% of |DC Offset| + 20 mV)
      Resolution (spec.)
      		4 mV (amplitude 250 mVpp to 5Vpp),
      1 mV (amplitude 10 mVpp to 250mVpp)
      Baseline DC Offset
      Range (spec.)
      		± 2.5V adjustable
      Resolution (spec.)
      		2 mV
      Rise/Fall Time (20% to 80%)
      		< 70 ps
      Rise/Fall Time (10% to 90%)
      		< 95 ps (1Vpp amplitude), < 105 ps (5Vpp amplitude)
      Overshoot
      		< 5%
      Channel to Channel RMS Jitter 1
      		< 10 ps
      Initial delay
      		0s to 8s (retriggerable delay off)
      0s to 2.5us (retriggerable delay on)
      1 All channels at the same frequency in Single Pulse mode and Continuous mode
      Trigger input specifications
      Impedance
      		50 Ohm or 1K Ohm programmable
      Range (spec.)
      		± 3.5 V (50 Ohm input impedance)
      ± 10 V (1K Ohm input impedance)
      Minimum detectable amplitude (spec.)
      		< 50 mVpp
      Threshold
      Range (spec.)
      		± 8V
      Resolution (spec.)
      		10 mV
      Accuracy
      		± 100 mV
      Max. input frequency (spec.)
      		40 MHz
      Min. pulse width (spec.)
      		1 ns
      Max. external width mode input frequency (spec.)
      		1 GHz
      Edge selection
      		Positive, negative, both
      Prescaller(for every channel)
      		0 to 65535
      Trigger output specifications
      Impedance
      		50 Ohm nominal
      Amplitude (open load)
      Range (spec.)
      		1.8V to 3.3V adjustable
      Resolution (spec.)
      		1 mV
      Accuracy
      		± 1%
      Delay (trigger in to trigger out)
      		< 100 ns
      RMS jitter (trigger in to output or trigger out)
      		< 30 ps (Trigger IN Frequency ≤ 15 MHz)
      Width
      		10 ns (single,burst mode)
      Period/2 (continuous mode)
      Initial delay
      		0s to 8s (continuous mode)
      0s to 2.5us (single,burst,gated mode)
      Internal timer
      Time range (Frequency range)
      		25ns to 42.9 sec (40Mhz to 23.3 mHz)
      Time resolution
      		1 ps
      Frequency accuracy
      		± 2ppm max
      External Clock IN
      Connector type
      		SMA on rear panel
      Input Impedance
      		50 Ω,AC Coupled
      Input voltage range
      		-5 dBm to 4 dBm sine or square wave (rise time T10-90 <1 ns
      and duty cycle from 40% to 60%)
      Damage level
      		+8 dBm or ±15 VDC Max
      Frequency range
      		10 MHz to 100 MHz
      External Clock OUT
      Connector type
      		SMA on rear panel
      Output Impedance
      		50 Ω,DC Coupled
      Frequency
      		10 MHz or External Clock IN Frequency
      Accuracy
      		± 2ppm max
      Aging
      		± 1.0 ppm/year max
      Amplitude
      		Square wave: 0V to 1.25 V into 50 Ω, 0V to 2.5 V into High Z
      Programmability
      Trigger modes
      		Single, continuous, burst, gated
      Multiple pulse modes
      		Single, double, triple, quadruple, external width
      Power
      Voltage range
      		100-240 VAC ±10%
      Frequency range
      		47-63 Hz
      Max. power consumption
      		120 W
      Environmental characteristics
      Temperature (operating)
      		+5 °C to +40 °C (+41°F to 104 °F)
      Temperature (non-operating)
      		-20 °C to +60 °C (-4 °F to 140 °F)
      Humidity (operating)
      		5 % to 80 % relative humidity with a
      maximum wet bulb temperature of
      29 °C at or below
      +40 °C, (upper limit de-rates to 20.6%
      relative humidity at +40 °C .
      Non-condensing.
      Humidity (non-operating)
      		5 % to 95 % relative humidity with a
      maximum wet bulb temperature of
      40 °C at or below
      +60 °C, (upper limit de-rates to 29.8 %
      relative humidity at +60 °C.
      Non-condensing.
      Altitude (operating)
      		3,000 meters (9,842 feet) maximum at or below 25°
      Altitude (non-operating)
      		12,000 meters (39,370 feet) maximum
      EMC and safety
      Safety
      		EN61010-1
      Main Standards
      		EN 61326-1:2013 – Electrical equipment for measurement,
      control and laboratory use –
      EMC requirements – Part 1: General requirements
      Immunity
      		EN 61326-1:2013
      General characteristics
      Display
      		7 inch, 1024x600, capacitive touch LCD
      Operative System
      		Windows 10
      External Dimensions
      		W 445 mm – H 135 mm – D 320 mm
      (3U 19” rackmount)
      Weight
      		21.4 lbs (9.7 Kg)
      Front panel connectors
      		OUTPUT1 (SMA)
      OUTPUT2 (SMA)
      TRG.IN (SMA)
      TRG.OUT (SMA)
      2 USB 3.0 ports      		OUTPUT1 (SMA)
      OUTPUT2 (SMA)
      OUTPUT3 (SMA)
      OUTPUT4 (SMA)
      TRG.IN (SMA)
      TRG.OUT (SMA)
       2 USB 3.0 ports
      Rear panel connectors
      		External Monitor ports (HDMI, VGA)
      2 USB 2.0 ports
      2 USB 3.0 ports
      3 COM ports
      2 Ethernet ports (10/100/1000BaseT Ethernet, RJ45 port)
      Audio In/Out ports
      2 PS/2 keyboard and mouse ports
      External Clock IN (SMA)
      External Clock OUT (SMA)
      Hard Disk
      		128 GB SSD
      Processor
      		Intel® Celeron J1900, 2 GHz (or better)
      Processor Memory
      		8 GB
      TOP