產品明細

Frontline TLF3000 Bluetooth RF PHY Tester

RF PHY 測試平台

    產品簡述
    ♦ 支援2.4 GHz PHY Test包括: BR / EDR, BLE, Zigbee
    ♦ 可提供Signaling或 Non-Signaling測試
    ♦ 支援完整的Test case
    ♦ 支援AoA / AoD測試項目 
    ♦ 生產測試支援2、4、8、16和32待測物
    ♦ 內建信號產生器(Blocking/CI Test)及分析功能
    ♦ In-band emission量測少於2.5ms內完成,縮短測試時間
    ♦ Packet Sniffer提供輸出到Wireshark或pcap-ng格式的資料儲存
    ♦ API支援Python / C / C++
      詢價

      產品詳細介紹Product Introduction

      Bluetooth LE RF PHY Tester

      The Bluetooth LE developer license provides the user with a highly portable and flexible test platform, specifically designed for use in a development lab environment.
      The PHY test mode provides access to test scripts to execute all* of the PHY test cases specified in Bluetooth LE RF Test Specification without the need for additional test equipment. The test scripts are set to the requirements of the specification by default for pre-compliance testing. Individual test case parameters can be altered to test above and beyond the specification.
      *Separate license is required for the AoA/AoD test scripts to execute test cases added in TCRL 2019-2.
      Signal generator mode provides all the signals (packetized LE signals, in-band and out-of-band interferers) required to effectively test receiver performance. Signals as weak as -120dBm can be generated for testing Coded PHYs for long range and support for AoA/AoD signal generation.
      Signal analyzer mode performs transmitter tests on conducted or off-air signals without knowledge of the payload format or hopping sequence and test coverage includes AoA/AoD supplemental data.
      Advertise/Scan Mode generates advertising or scan request packets to provoke activity from DUTs that do not easy access to DTM.
      The TLF3000 has been honed for speed possessing unique parallel architecture to maximize throughput. The ability to perform in-band emission tests over the entire 2.4GHz ISM band in just a few milliseconds is particularly impressive.
       
      Production Configuration
      The Bluetooth LE Production configuration provides a limited GUI allowing the user to preselect relevant test cases which, when saved as a script, can then be run remotely in a production line test environment. The TLF3000 has a native language to control test case functionality and an API that can be driven via Python or C/C++ scripts.
      Production license is specifically designed for use in the Production line environment and is not suitable for hands-on lab use. Signal Generator and Signal Analyzer functionality is not accessible via GUI with the Production license.
      For Bluetooth LE, there are addition licenses available to support testing of multiple (2, 4, 8, 16, or 32) DUTs simultaneously.

      Features
      • Full support of Bluetooth 5
      • Support for all RF-PHY test cases
      • Fast - 2 second boot time, and the in-band emissions test completes in 2.5 ms
      • Fully configurable test coverage and test time
      • Performs RF-PHY testing on live links
      • Simple and intuitive GUI quickly identifies faults
      • Single signal path eliminates the need for multiple pieces of gear
      • Standalone mode - test scripts can reside on a USB stick

      Specifications
      • Supported Host OS Windows 7 and Windows 10
      • Host Interfaces USB - Connector type: Micro-USB
      • - Speed Rating: High Speed
      • - VBUS Load: 2.2 µF, > 10 kΩ
      • Ethernet
        • Connector type: RJ45
        • Speed: 10 / 100 / 1000
      • Input Power
        • Connector type: 2.5 mm jack
        • Input voltage: 12 V DC
        • Power: 10 W typ (application dependent)
        • Reverse polarity protection: Yes
        • Over voltage protection: Yes
        • nder voltage protection: Yes
      • Dimensions 158.5 mm x 160.0 mm x 47.0 mm (6.3” X 1.9” X 6.3” )
      • Weight 1.3 kg (2.87 lb) • Operating Temperature 0°C to 40°C
      • Humidity 0% - 90% (0 °C – 35 °C), noncondensing

      Typical Testing Configuration
      TOP