產品明細

SCOPE RIDER

示波器

    產品簡述
    ♦ 測試頻寬: 60 MHz to 500 MHz
    ♦ 取樣率: up to 5 Gsample/s
    ♦ 記憶深度: up to 500 kpts, 50 Mpts segmented memory
    ♦ ADC解析度:10-bit
    ♦ 隔離通道 (CAT IV 600 V (RMS) / CAT III 1000 V (RMS))

      產品詳細介紹Product Introduction

      Lab performance in a rugged, portable design

      When debugging embedded devices in the lab or analyzing complex problems in the field, the R&S®Scope Rider offers the performance and capabilities of a lab oscilloscope as well as the form factor and ruggedness of a battery-operated handheld device. Isolated channels combined with 500 MHz bandwidth makes it a perfect choice for power electronics applications. An integrated multimeter (two-channel model) or a multimeter mode (four-channel model) make the instrument the perfect tool for troubleshooting all kinds of electronics problems.
       

      Available ModelsBandwidthChannelsSample rateMax. Memory depthOptional MSO
      R&S®RTH100260 MHz25 Gsample/s500 kpts8 digital channels
      R&S®RTH100460 MHz45 Gsample/s500 kpts8 digital channels
      R&S®RTH1002 + RTH-B221100 MHz25 Gsample/s500 kpts8 digital channels
      R&S®RTH1004 + RTH-B241100 MHz45 Gsample/s500 kpts8 digital channels
      R&S®RTH1002 + RTH-B222200 MHz25 Gsample/s500 kpts8 digital channels
      R&S®RTH1004 + RTH-B242200 MHz45 Gsample/s500 kpts8 digital channels
      R&S®RTH1002 + RTH-B223350 MHz25 Gsample/s500 kpts8 digital channels
      R&S®RTH1004 + RTH-B243350 MHz45 Gsample/s500 kpts8 digital channels
      R&S®RTH1002 + RTH-B224500 MHz25 Gsample/s500 kpts8 digital channels
      R&S®RTH1004 + RTH-B244500 MHz45 Gsample/s500 kpts8 digital channels
      Features:
      • Superior performance
        • 60 MHz to 500 MHz with 5 Gsample/s sampling rate
        • 50000 waveforms per second
        • 10-bit A/D converter
        • 2 mV/div to 100 V/div
        • Up to 200 V offset range
        • 37 automatic measurement functions
      • 8 instruments in one handheld package
        • Lab performance oscilloscope
        • Logic analyzer
        • Protocol analyzer I 2 C/SPI, UART, CAN/LIN, CAN-FD, SENT
        • Data logger
        • Additional multimeter channel in two-channel model.)Digital multimeter (
        • Spectrum analyzer
        • Harmonics analyzer
        • Frequency counter
      • Capacitive touch and keypad operation
        • Full operation via touch panel or keypad
        • See more with a 7" color display
        • Easy parameter adjustment with multifunction wheel
        • Large buttons for use with gloves
      • Outstanding protection
        • Maximum safety in all environments: CAT IV 600 V/CAT III 1000 V
        • IP51 housing that meets military environmental requirements
        • Nonslip and impact resistant rubberized surface
      • Excellent connectivity and much more
        • Wireless LAN and Ethernet for web-based remote control and quick data access
        • Finish faster with one-touch documentation
        • MicroSD card and USB device/host support
        • More than 4 hours of battery power

      Applications:
      Lab oscilloscope performance
      When debugging embedded devices in the lab or analyzing complex problems in the field, the R&S®ScopeRider offers the performance and capabilities of a lab oscilloscope as well as the form factor and ruggedness of a batteryoperated handheld device.

      Small sensor signals can be analyzed with an excellent vertical sensitivity of 2 mV/div. Triggering on protocol events and decoding protocol data enables convenient debugging of digital control signals. A digital trigger system provides the best trigger sensitivity available in a handheld oscilloscope, and 14 trigger types give the flexibility required to capture exactly the right signal. With 37 automatic measurement functions, the R&S®ScopeRider delivers the capabilities of a lab oscilloscope when analyzing signal parameters.

      Safe measurements on power electronics
      Analyzing modern electric drive systems requires measuring motor voltages and currents while analyzing digital control signals. Safety is a key consideration for such measurements.

      The R&S®ScopeRider offers up to four isolated input channels with CAT IV 600 V rating that allow measurements on high voltage electronics without compromising safety. Digital control signals can be analyzed with the 8-bit logic interface that is isolated from the analog input channels. The protocol trigger and decode capability of the R&S®ScopeRider is unprecedented in handheld oscilloscopes and provides direct display of decoded messages.

      High speed acquisition system with deep history: never miss rare faults again
      Capturing and analyzing rare anomalies in electric signals is a typical use case when debugging electronic systems. With an acquisition rate of up to 50000 waveforms per second – more than 1000 times faster than conventional handheld oscilloscopes – the R&S®ScopeRider sees signals other oscilloscopes miss. Rare faults in signals can be reliably captured and analyzed.

      In history mode, the instrument automatically stores up to 5000 waveforms in a separate history buffer. At any point in time, acquisition can be stopped and any waveform in the history buffer can be analyzed using the full oscilloscope functionality. One-time anomalies that would have been missed by a conventional handheld oscilloscope can now be analyzed in detail.


      Specifications:
      Specifications in brief
      Vertical system
      Input channels2-channel models2 oscilloscope channels, 1 digital multimeter
       4-channel models4 oscilloscope channels
      Maximum input voltageBNC inputsCAT IV 300 V (RMS), 424 V (Vp)
       with probe R&S®RT-ZI10 or R&S®RT-ZI11CAT IV 600 V, CAT III 1000 V
      Input sensitivity 2 mV/div to 100 V/div
      Vertical resolution of overall system 9 bit
      Acquisition and horizontal system
      Maximum real-time sampling rate 1/2/4 channels active 5/2.5/1.25 Gsample/s
      Acquisition memory 1/2/4 channels active 500/250/125 ksample/channel
      Real-time waveform acquisition rate max. 50000 waveforms/s
      Timebase range  1 ns/div to 500 s/div
      Logic analyzer (MSO) functionality (optional: R&S®RTH-B1)
      Input channels/memory depth  8 logic channels/125 ksample
      Bandwidth/sampling rate  250 MHz/1.25 Gsample/s
      Digital trigger system
      Trigger modes  auto, normal, single
      Trigger types advanced trigger types optional (R&S®RTH-K19) 14 trigger types
      Automatic oscilloscope measurements
      Automatic measurements  37 measurement functions
      Mask testing
      Mask definition  tolerance tube
      Actions on violation  none, beep, stop
      History and segmented memory (R&S®RTH-K15)
      Number of segments  up to 5000
      Protocol triggering and decoding
      Supported protocolsoptional: R&S®RTH-K1, R&S®RTH-K2, R&S®RTH-K3, R&S®RTH-K9, R&S®RTH-K3, R&S®RTH-K10I2C, SPI, UART/RS-232/RS-422/RS-485, CAN, LIN, CAN-FD, SENT
      Data logger
      Number of simult. logging channels  4
      Measurement speed  1/2/5 measurements/s
      Memory depth  2 Msample per logging channel
      Digital voltmeter/digital multimeter
      Resolution2-channel version (digital multimeter) 10000 counts
       4-channel version (digital voltmeter) 999 counts
      Voltage and current current with optional current probe or shunt DC, AC, AC + DC
      Temperature  with PT100 temperature probe
      Resistance, continuity, diode test, capacity, frequency  only 2-channel version
      General data
      Dimensions W × H × D 201 mm × 293 mm × 74 mm (7.91 in × 11.54 in × 2.91 in)
      Weight with battery 2.4 kg (5.3 lb) (nom.)
      IP rating  IP51, in line with IEC60529
      Screen  7.0" LC TFT 800 × 480 pixel color display
      Interfaces  USB host, USB device, LAN, wireless LAN (optional)