產品明細

RTE1000

示波器

    產品簡述
    ♦ 測試頻寬: 200 MHz to 2 GHz
    ♦ 取樣率: 5 Gsample/s
    ♦ 最大記憶深度: 200 Msample
    ♦ 垂直解析度: up to 16-bit
    ♦ MSO: 16 digital channels, optional, retrofittable

      產品詳細介紹Product Introduction

      AT A GLANCE

      Truly uncompromised in performance and impressively user-friendly – that’s the R&S®RTE oscilloscope.

      With bandwidths from 200 MHz to 2 GHz and top performance parameters, the R&S®RTE oscilloscopes set standards in their class:
      ► Highest sampling rate of 5 Gsample/s and deepest memory of 200 Msample for accurate acquisition of long signal sequences
      ► Acquisition rate of more than one million waveforms/s for finding signal faults quickly
      ► Extremely low-noise frontends and 16-bit vertical resolution in high definition mode for precise results
      ► Highly accurate digital trigger system with virtually no jitter for triggering on smallest signal details in realtime

      Tools such as QuickMeas, fast mask tests, powerful spectrum analysis, history function and 77 automatic measurement functions are supplied as standard. Results are available fast thanks to hardware-assisted implementation of the measurement tools in the Rohde&Schwarz ASIC. The results are based on a large number of waveforms to provide statistically conclusive information.

      R&S®RTE oscilloscopes support dedicated application solutions for complex analyses, including trigger and decoding options for serial protocols and a power analysis option. The mixed signal option provides 16 digital channels for analyzing logical components in embedded designs.

      The powerful R&S®RTE is impressively easy to use thanks to its high-resolution 10.4" XGA touchscreen.

      R&S®RTE oscilloscopes offer a fully integrated multidomain test solution with time, frequency, protocol and logic analysis functions. This one-box solution makes it possible to quickly detect errors even in complex designs.

      From embedded design development to power electronics analysis to general debugging, the R&S®RTE oscilloscopes handle everyday T&M challenges quickly, accurately and easily.


      Available ModelsBandwidthChannelsSample rateMax. Memory depthOptional MSO
      R&S®RTE1022200 MHz25 Gsample/s200 Mpts16 digital channels
      R&S®RTE1024200 MHz45 Gsample/s200 Mpts16 digital channels
      R&S®RTE1032350 MHz25 Gsample/s200 Mpts16 digital channels
      R&S®RTE1034350 MHz45 Gsample/s200 Mpts16 digital channels
      R&S®RTE1052500 MHz25 Gsample/s200 Mpts16 digital channels
      R&S®RTE1054500 MHz45 Gsample/s200 Mpts16 digital channels
      R&S®RTE11021 GHz25 Gsample/s200 Mpts16 digital channels
      R&S®RTE11041 GHz45 Gsample/s200 Mpts16 digital channels
      R&S®RTE11521.5 GHz25 Gsample/s200 Mpts16 digital channels
      R&S®RTE11541.5 GHz45 Gsample/s200 Mpts16 digital channels
      R&S®RTE12022 GHz25 Gsample/s200 Mpts16 digital channels
      R&S®RTE12042 GHz45 Gsample/s200 Mpts16 digital channels

      Features:
      • MORE CONFIDENCE IN MEASUREMENT RESULTS
        • One million waveforms/s
        • Very low inherent noise of 100 µV at 1 mV/div and 1 GHz
        • Full measurement bandwidth up to 2 GHz, even at 500 µV/div
        • Up to 16-bit vertical resolution
        • Memory up to 200 Msample
        • Minimal trigger jitter < 1 ps
        • Trigger hysteresis can be adjusted to signal quality
      • MORE FUN TO USE
        • High-resolution 10.4" XGA touchscreen
        • Optimized for touchscreen operation
        • Drag&drop signals and measurement results flexibly on the screen
        • Results are only two clicks away thanks to powerful toolbar
        • Convenient tools such as QuickMeas, fingertip zoom and undo/redo
      • MORE FUNCTIONS AND FASTER RESULTS
        • Even in its basic configuration, the R&S®RTE offers a decisive edge when performing everyday measurement tasks:
        • 77 automatic measurement functions including statistical evaluation
        • QuickMeas for eight results at the push of a button
        • History function for looking back in time
        • Powerful FFT-based spectrum analysis
        • Mask test for identifying signal anomalies
      • LOGIC ANALYSIS: FAST AND PRECISE TESTING OF EMBEDDED DESIGNS
        • Every R&S®RTE can be turned into a mixed signal oscilloscope
        • 16 digital channels
        • 400 MHz, 5 Gsample/s sampling rate and 100 Msample memory
        • More than 200000 waveforms/s
        • Wide range of trigger capabilities with 200 ps resolution
        • Many analysis tools such as history function and bus display as analog waveform
      • SERIAL PROTOCOLS: EASY TRIGGERING AND DECODING
        • Easy configuration with the app cockpit
        • Hardware-assisted triggering and decoding
        • Color-coded telegram data display in honeycomb diagram or in a table
        • Support of standard CAN-dbc and FIBEX formats
        • Triggering and decoding of Manchester and NRZ coded serial protocols
        • Simultaneous decoding of up to four serial buses
        • Comprehensive search functions for easy analysis of long signal sequences
      • POWER ANALYSIS
        • Analysis of input and output as well as the transfer function of switched-mode power supplies
        • Measurement wizard for fast results
        • Documentation of results at the push of a button
        • Harmonic current analysis in line with conventional EN, MIL and RTCA standards
      • SPECTRUM ANALYSIS
        • Multichannel spectrum analysis
        • Display of change in power and frequency over time
        • Frequency analysis with logarithmic display
        • Fast results with automatic peak list measurement
        • Outstanding RF performance due to high dynamic range and low inherent noise of the analog frontend
        • Correlation of time and frequency analysis with numerous analysis functions
      • EMI DEBUGGING: TESTING DURING DEVELOPMENT
        • High input sensitivity and dynamic range for reliable detection of unwanted emissions
        • Powerful FFT function with information on the frequency of occurrence of spectral components
        • Gated FFT for easy correlation between frequency and time
        • Mask test in the frequency range for targeted analysis of sporadic emissions
      • INTEGRATED ARBITRARY WAVEFORM GENERATOR
        • Every R&S®RTE can be enhanced to include a 100 MHz arbitrary waveform generator
        • Single-ended and differential interface stimulation
        • Test your device with native signals
      • HIGH DEFINITION: SEE MORE WITH 16-bit VERTICAL RESOLUTION
        • 16-bit vertical resolution
        • Sharper waveforms for more signal details and even more precise analysis results
        • Realtime triggering on smallest signal details
        • No aliasing
      • EXTENSIBLE FOR FUTURE APPLICATIONS
        • On-site configuration of hardware options
        • Software applications can be upgraded on demand
        • Always remains up-to-date thanks to firmware updates
        • POWERFUL PROBES
        • Comprehensive probe portfolio for all measurement tasks
        • High signal fidelity thanks to excellent specifications
        • R&S®ProbeMeter with 0.01% measurement accuracy
        • Active probes with micro button for instrument control

      Specifications:
      Specifications in brief
      Vertical system
      Number of channels R&S®RTE1022/1032/1052/1102/1152/1202 2
      R&S®RTE1024/1034/1054/1104/1154/1204 4
      Analog bandwidth (–3 dB) at 50 Ω R&S®RTE1022/1024; R&S®RTE1032/1034;
      R&S®RTE1052/1054; R&S®RTE1102/1104;
      R&S®RTE1152/1154; R&S®RTE1202/1204
      ≥ 200 MHz;≥ 350 MHz; ≥ 500 MHz;≥ 1 GHz;
      ≥ 1.5 GHz;≥ 2 GHz
      Rise time R&S®RTE1022/1024; R&S®RTE1032/1034;
      R&S®RTE1052/1054; R&S®RTE1102/1104;
      &S®RTE1152/1154; R&S®RTE1202/1204
      < 1.75 ns; < 1 ns;
      < 700 ps; < 350 ps;
      < 233 ps; < 175 ps
      Impedance 50 Ω ± 1.5%, 1 MΩ ± 1% || 16 pF ± 1 pF (meas.)
      Input sensitivity max. bandwidth in all ranges 50 Ω: 500 µV/div to 1 V/div; 1 MΩ: 500 µV/div to 10 V/div
      Resolution 8 bit (7-bit ENOB)
      with high definition mode 16 bit
      Acquisition system
      Realtime sampling rate max. 5 Gsample/s on each channel
      Acquisition memoryper channel/1 channel activeR&S®RTE 2-channel model: 50/100 Msample; R&S®RTE 4-channel model: 50/200 Msample
      Acquisition rate > 1000000 waveforms/s
      Decimation modes any combination of decimation mode and waveform arithmetics sample, peak detect, high resolution, root mean square
      Waveform arithmetics off, envelope, average
      Horizontal system
      Timebase range 50 ps/div to 5000 s/div
      Timebase accuracy after delivery/calibration ±2 ppm
      Channel deskew ±100 ns
      Trigger system
      Trigger typesedge, glitch, width, runt, window, timeout, interval, slew rate, data2clock, pattern, state, serial pattern, TV/video, serial bus trigger (optional)
      Sensitivity definition of trigger hysteresis can be set automatically or manually from 0 div to 5 div
      Analysis and measurement functions
      Automatic measurements 77 measurement functions
      Cursor measurements 2 cursor sets, each consisting of two horizontal and two vertical cursors
      Waveform mathematics 4 math waveforms; mathematics, logical operations, comparison, FIR filter, FFT
      MSO option
      Digital channels 16 (2 logic probes)
      Input impedance 100 k || 4 pF
      Sampling rate 5 Gsample/s per channel
      Acquisition memory 100 Msample per channel
      Parallel buses up to 4
      General data
      Dimensions W × H × D 427 mm × 249 mm × 204 mm
      (16.81 in × 9.8 in × 8.03 in)
      Weight without options, nominal 8.6 kg (18.96 lb)
      Screen 10.4" LC TFT color touchscreen, 1024 × 728 pixel (XGA)
      Interfaces1 Gbit/s LAN, 4 × USB 2.0, GPIB (optional), DVI for external monitor, external trigger, trigger output