亞迅科技股份有限公司
代理廠牌
Principals
Rohde & Schwarz
Active Technologies
Haivision (Aviwest)
DekTec
Interra systems
Leader
Lumantek
Meguro
MIK
Murideo
Phabrix
Portrait (CalMAN)
Sencore
Teledyne Lecroy
WellAV
Harkwood
產品應用
Application
基礎儀器需求
數位電視應用
廣播電視應用
物聯網IoT/藍牙BT應用
色彩分析校正應用
實驗室測試需求
最新消息
News
最新消息
關於亞迅
About Us
公司介紹
經營理念
核心價值
人才招募
連絡我們
Contact
search
分類列表
PRODUCTS
產品應用
基礎儀器需求
產品明細
ZNH
手持式向量網路分析儀
產品簡述
♦ 頻率範圍: 30 kHz to 4/8/18/26.5 GHz
♦ 動態範圍: up to 100dB (typ)
♦ 輸出功率: up to 0dBm (typ)
♦ 支援S參數測試(S
11
, S
12
, S
21
, S
22
)
♦ 無反光顯示屏幕, 尺寸小, 外殼堅固(IP51)
詢價
產品詳細介紹
Product Introduction
AT A GLANCE
The R&S®ZNH is a full two-port handheld vector network analyzer (VNA) that offers one-port cable and antenna measurement and full two-port S-parameter measurements. The touch based interface simplifies operation and a configuration overview menu makes measurement preparation more efficient. The R&S®ZNH may have a small form factor, but it is complete in every detail and delivers high performance and all the key functionalities.
Maintaining the operation of RF communications systems requires fast identification of any defects in the system components. The R&S®ZNH, a multifaceted handheld vector network analyzer, helps on-site field engineers remedy defective components detected in the system. The basic version of the R&S®ZNH can perform one-port cable and antenna measurements and four S-parameter measurements up to 26.5 GHz. With the addition of the power meter, pulse measurement, wave ratio and wave quantities functionalities, the R&S®ZNH enables field engineers to maintain and restore radar and satellite systems swiftly.
The ordering concept for R&S®ZNH options is simple, straightforward and transparent, with no cross-option dependency.
The spaced out keys, backlit keypad and ruggedized housing make the R&S®ZNH suitable for indoor and outdoor use as well as stationary and mobile environments. The VNA is ideal for tasks such as antenna system installation and maintenance, distance-to-fault measurements (DTF) on cables, one-port cable loss measurements and antenna matching measurements. The analyzer can also be used for development, production and service tasks where the measurement locations and test requirements constantly change.
The R&S®ZNH offers flexible and straightforward operation. Depending on the application, it can be operated either via its 7" capacitive touchscreen (no display calibration required) or the keypad. The touchscreen enables users to adjust the most common settings, such as parameter settings, and manage markers with smartphone-like gestures.
Tapping the configuration overview icon provides quick access to the menu for checking and changing the display options and parameters. This helps to reduce the number of steps required during setup and measurement.
Models
Available Models
Ports
Frequency
Connectors
R&S®ZNH4
2
4 GHz
N
R&S®ZNH8
2
8 GHz
N
R&S®ZNH18
2
18 GHz
N
R&S®ZNH26
2
26.5 GHz
PC 3.5mm
Key Facts
Frequency range from 30 kHz to 4/8/18/26.5 GHz
One-port cable and antenna measurement with basic instrument
S-parameter (S11, S12, S21, S22) measurement with basic instrument
100 dB (typ.) dynamic range for filter and antenna isolation measurements
Factory calibration over entire frequency range
Built-in receiver step attenuator to increase port input power range linearity
Built-in DC voltage supply (bias) for active components such as amplifiers
Easy handling due to low weight (3.1 kg with battery) and spaced out function keys
Fast boot time, non-reflective display, small form factor, ruggedized housing (IP51)
7" color touchscreen display for intuitive operation with smartphone-like gestures
Measurement wizard to speed up measurements and eliminate human error
Save measurement results onto an SD memory card or a USB flash drive
Easy and cost-efficient upgrades for all options via software keycode
Features
Lightweight design, heavyweight performance
Receivers architecture
Outstanding RF performance
One-port cable and antenna measurements
Four S-parameter measurements
Optional measurement modes
Power sensor support (R&S®ZNH-K9)
Pulse measurement (R&S®ZNH-K29)
DC bias variable voltage source (R&S®ZNH-K10)
Vector voltmeter (R&S®ZNH-K45)
Wave ratios and wave quantities (R&S®ZNH-K66)
Mixed mode S-parameters (R&S®ZNH-K47)
Power sensor measurement versus frequency (R&S®ZNH-K69)
Time domain analysis (R&S®ZNH-K68)
Simple to operate
Multi-touch screen
Simplify measurements with the wizard function
Remote control with Android/iOS app
Simple to configure
Simple and fast setup with configuration overview menu
Flexible calibration approach
Simple to add value
Comprehensive standard features
Simple option ordering concept
Specifications
Specifications in brief
Network analysis
Frequency range
R&S®ZNH4
30 kHz to 4 GHz
R&S®ZNH8
30 kHz to 8 GHz
R&S®ZNH18
30 kHz to 18 GHz
R&S®ZNH26
30 kHz to 26.5 GHz
Test port connector
R&S®ZNH4
type N female
R&S®ZNH8
type N female
R&S®ZNH18
type N female
R&S®ZNH26
3.5 mm, male
Number of test ports
2
Standard measurement functions
one-port cable and antenna measurement
reflection and transmission measurement, one-port cable loss, DTF measurement
two-port vector network analysis
S
11
, S
21
, S
12
, S
22
Result formats
► dB magnitude
► phase
► unwrapped phase
► Smith
► linear magnitude
► real
► imaginary
► SWR
► polar
► group delay
Calibration methods
► reflection normalization (open and short)
► reflection (OSM)
► transmission normalization (P1 and P2)
► transmission normalization in both directions
► TOSM
► UOSM
Dynamic range
100 dB (typ.)
Output power
0 dBm (typ.)
Trace noise magnitude (RMS)
0.0015 dB (typ.)
Trace noise phase (RMS)
0.0015° (typ.)
Measurement speed
761 µs per point
Number of measurement points
selectable
3 to 16001
Measurement bandwidth
range
10 Hz to 100 kHz in 1/3/10 steps
Measurement range
–120 dB to +30 dB
Maximum rated input level
CW RF power
23 dBm (= 0.2 W)
peak RF power
26 dBm (= 0.4 W)
DC bias output voltage
mode: internal
+2 V to +32 V in 0.1 V steps (nom.)
General data
Display size
capacitive touchscreen
7"
Display resolution
WVGA
800 × 480 pixel
Battery (R&S®HA-Z306)
capacity
72 Wh (version E),
74.5 Wh (version F and above)
voltage
11.25 V (nom., version E)
10.8 V (nom., version F and above)
Operating time with new, fully charged battery
4 h
Dimensions
W × H × D
202 mm × 294 mm × 76 mm
(8.0 in × 11.6 in × 3 in)
Weight
3.1 kg (6.8 lb)
回列表頁
商品諮詢
TOP
購物須知
TOP