產品明細

HMF2550

函數信號產生器

    產品簡述
    ♦ 波形: 正弦波, 方波, 三角波/斜坡波形, 脈衝, 任意波
    ♦ 調變模式: AM, FM, pulse, PWM, FSK (internal and external)
    ♦ 外部連接器: TRIGGER (I/O), SWEEP (O), MODULATION (I)
    ♦ 任意波形產生器: 250 Msample/s, 14 bit, 256 kpoint
    ♦ 頻率範圍: 10 µHz ~ 50 MHz
    ♦ 輸出電壓: 5 mV ~ 10 V (Vpp)
    ♦ USB/RS-232遠端控制接口
    ♦ 無風扇設計
      詢價

      產品詳細介紹Product Introduction

      Accurate, versatile and affordable

      Powerful pulse generator Provides pulses with a recurrence rate of up to 12.5 MHz/25 MHz; the pulse width can be set from 15 ns to 999 s with a resolution of 5 ns. Rise/fall time can be selected from 8 ns to 500 ns – a very useful feature when characterizing input hysteresis of semiconductor devices Easily create arbitrary waveforms Arbitrary waveforms can be developed with PC software. Stored waveforms can be loaded via front USB port or imported via the complimentary HMExplorer software (available for download)

      Available models
      ModelsFrequency range
      R&S®HMF252510 μHz to 25 MHz
      R&S®HMF255010 μHz to 50 MHz
      Features
      • Frequency range: 10µHz to 50MHz
      • Triangle and ramp signal up to 10MHz
      • Pulse: frequency range from 100µHz to 25MHz
      • Output voltage: 5mVPP to 10VPP (into 50Ω load)
      • DC offset: ± 5mV to 5V
      • Output impedance steplessly adaptable (1Ω to 10kΩ)
      • Total harmonic distortion: 0.04% (f < 100kHz)
      • Waveform modes: sine, square, pulse, triangle, ramp and arbitrary waveforms (incl. standard curves: white noise, pink noise, cardiac, exponential rise and fall, etc.)
      • Modulation modes: AM, FM, pulse, PWM, FSK (internal and external)
      • Arbitrary waveform generator: 250MSa/s, 14bit, 256kSa
      • Easily create your own waveforms using standard PC software
      • Oscillographic signal display
      • Front USB to easily save and recall waveforms and settings, RS-232/USB dual interface for remote control
      • BNC connectors: modulation input, sweep output, trigger (input, output), 10MHz reference (input, output, ±1ppm TCXO)
      • Fanless design

      Specifications
      R&S® Arbitrary Function Generator
      HMF2525: 25MHz
      HMF2550: 50MHz
      Device Characteristics
      All specifications valid into 50Ω load
      Models
        R&S®HMF25251 channel,
      frequency range to 25MHz
        R&S®HMF25501 channel,
      frequency range to 50MHz
      Waveforms
        standardsine, square, pulse, ramp, triangle
        arbitrary waveformsup to 256kSa
        predefined waveformssine, square (50%), ramp (positive/negative), triangle (50%),
      oise (white/pink), cardinal sine, exponential (rise/fall)
      Operation modescontinuous, modulate, sweep, burst
      Modulation typesAM, FM, PM, FSK, PWM
      Temperature stability1x 10-6 (+18°C to +28°C)
      Aging (after one year)±1x 10-6 (+25°C)
      Waveform Characteristics
      Sine
      Frequency range
        R&S®HMF252510µHz to 25MHz
        R&S®HMF255010µHz to 50MHz
      Amplitude flatness
        up to 10MHz±0.15dB
        10MHz to 25MHz±0.2dB
        above 25MHz±0.4dB
      Harmonic distortion
        up to 100kHz< -70dBc
        100kHz to 10MHz< -55dBc
        10MHz to 25MHz< -40dBc
        above 25MHz< -37dBc
      Total harmonic distortion (THD) up to 100kHz0.04% (typ.)
      Non-harmonic spurious
        up to 1MHz< -70dBc
        above 1MHz< -70dBc, increasing +6dB / decade
      Phase noise (SSB)
        10kHz Offset-115dBc / Hz (typ.)
      Square
      Frequency range
        R&S®HMF252510µHz to 25MHz
        R&S®HMF255010µHz to 50MHz
      Rise and fall times8ns, fixed
      Overshoot< 3% (typ.)
      Symmetryduty cycle: 50%
      accuracy: ±1% + 5ns
      Jitter<1nsrms (typ.)
      Pulse
      Frequency range
        R&S®HMF2525100µHz to 12.5MHz
        R&S®HMF2550100µHz to 25MHz
      Rise and fall times8ns to 500ns, variable
      Overshoot< 3% (typ.)
      Duty cycle0.01% to 99.99%
      Pulse widthmin. 15ns, resolution 5ns
      Jitter< 500psrms (typ.)
      Ramp and Triangle
      Frequency range
        R&S®HMF252510µHz to 5MHz
        R&S®HMF255010µHz to 10MHz
      Ramp symmetry0% to 100%, resolution 0.1%
      (0% ≙ negative ramp,
      100% ≙ positive ramp, 50% ≙ triangle)
      Linearity
        up to 250kHz< 0.1% (typ.)
        above 250kHz< 2% (typ.)
      Arbitrary
      Frequency range
        R&S®HMF2525100µHz to 12.5MHz
        R&S®HMF2550100µHz to 25MHz
      Waveform lengthup to 256kSa
      Sample rate250MSa/s
      Amplitude resolution14bits
      Internal non-volatile memoryup to 4MB
      Output Characteristics
      Waveform output BNC socket (front panel)
      Output impedance50Ω
      Signal outputon, off, inverted
      Overlad protectionshort-circuit-proof, max. ±15V of external voltage
      Amplitude
      Range5mVPP to 10VPP (into 50Ω)
      10mVPP to 20VPP (open circuit)
      Resolution 1mV
      UnitsVpp or dBm, selectable
      Accuracy±1% of setting ±1mVPP at 1kHz
      DC Offset
      Range±5mV to 5V (into 50Ω)
      ±10mV to 10V (open circuit)
      Resolution1mV (into 50Ω)
      UnitsV
      Accuracy±2% of offset setting ±0.5% of
      amplitude setting ±2mV ±1mV / MHz
      Burst
      Waveform signalsall (except pulse)
      Typecontinuous, counted, gated
      Count 1 to 50,000 cycles, infinite
      Start/Stop phase0° to 360° (sine only)
      Trigger sourcesmanual, internal or external trigger, via interface
      internal trigger period1µs to 500s
      Sweep
      Waveform signalsall (except pulse)
      Typelinear, logarithmic
      Directionup (fstart < fstop) down (fstart > fstop)
      Sweep time1ms to 500s, resolution 1ms
      Trigger sourcesimmediate (continous), internal, external (positive or negative slope)
      Markeradjustable to any frequency between fstart and fstop
      Modulation
      Modulation typesAM, FM, PM, FSK, PWM
      Waveform carrierall (except pulse)
      Internal modulation (waveform)sine, square (50%), ramp (pos., neg.),
      triangle (50%), noise (white, pink),
      cardinal sine, exponential (rise, fall),
      arbitrary up to 4,096points
      Internal modulation frequency10µHz to 50kHz
      External modulation bandwidth (-3dB)DC to 50kHz (250kSa/s sampling rate)
      Amplitude modulation (AM)
      Depth0% to 100%
      Sourceinternal (basic waveforms, arbitrary), external
      Frequency modulation (FM)
      Deviation10µHz to 10MHz
      Sourceinternal (basic waveforms, arbitrary), external
      Phase modulation (PM)
      Deviation-180° to +180°
      Sourceinternal (basic waveforms, arbitrary), external
      Frequency shift key modulation (FSK)
      Duty cycle0% to 100%
      Rate0Hz to 250kHz
      Hopany frequency within the carrier signal’s range
      Sourceinternal (basic waveforms, arbitrary), external
      Pulse width modulation (PWM)
      Deviation0% to 49.99% of pulse width
      Sourceinternal (basic waveforms, arbitrary), external
      Connectors
      External trigger / gate
      ConnectorBNC socket (front panel)
      Impedance5kΩ || 100pF
      Polaritypositive, negative slope
      LevelTTL, protected up to ±30V
      Pulse widthmin. 100ns
      Trigger output
      ConnectorBNC socket (front panel)
      Impedance50Ω
      LevelTTL, positive slope
      Frequencymax. 10MHz
      Modulation input
      ConnectorBNC socket (rear panel)
      Impedance10kΩ
      Voltage levelmax. ±5V full-scale
      Bandwidth (-3dB) DC to 50kHz (250kSa/s sampling rate)
      Frequency reference input
      ConnectorBNC socket (rear panel)
      Impedance1kΩ
      Frequency range10MHz ±100kHz
      LevelTTL
      Frequency reference output
      ConnectorBNC socket (rear panel)
      Impedance50Ω
      Frequency10MHz (norm.)
      Level1.65VPP (into 50Ω)
      Sweep output
      ConnectorBNC socket (rear panel)
      Impedance200Ω
      Level0V to 5V ramp synchronous with frequency sweeps
      Interfaces
        for mass storage1x USB-host (type A), FAT16/32
        for remote controlR&S®HO720 dual interface:
      RS-232 / USB-device (type B)
      Optional interfacesR&S®HO732 dual interface:
      Ethernet (RJ45) / USB-device (type B)
      R&S®HO740 interface: IEEE-488 (GPIB)
      Save and recallon internal file system (up to 4MB) or
      external USB memory (max. 4GB)
      General Characteristics
      Display
        screen size / type8.9cm (3.5”) QVGA color TFT
        resolution320 x 240
        backlightLED
      Real-time clock (RTC) date and time
      Power supply
        AC supply105V to 253V, 50Hz to 60Hz, CAT II
        power consumption30W (typ.)
      Safetysafety class I (EN61010-1)
      Temperature
        operating temperaturerange +5°C to +40°C
        storage temperaturerange -20°C to +70°C
      Rel. humidity 5% to 80% (without condensation)
      Mechanical data
        dimensions (W x H x D)285 x 75 x 365mm
        weight 3.6kg
      All specifiactions at 23°C after 30 minutes warm-up
      TOP