產品明細

AWG-5000 任意波形產生器

    產品簡述
    ♦ 取樣率: 6.16 GS/s
    ♦ 垂直解析可達16 Bit
    ♦ Edge time最小可達 110ps
    ♦ 最大動態範圍可達 5Vpp (50 ohms)
    ♦ 每個通道高達4Gpts (Up to 1024 Mpts per Channel)
    ♦ 最多可提供32個數位通道與類比通道同步(up  to 32 Digital Channels in synchronous with analog channels)
    ♦ 軟體使用者介面: 提供用於AWG模式的Simple TrueArb Rider與用於AFG模式的Simple Rider
      詢價

      產品詳細介紹Product Introduction

      ARB RIDER AWG-5000 ARBITRARY WAVEFORM GENERATOR

      World’s Fastest 16 Bit Arbitrary Waveform Generator

      The ARB Rider AWG-5000 is the world’s fastest 16 bit Arbitrary Waveform Generator: 6.16 GS/s real time update rate (12.32 GS/s in RF mode) and 16 bit vertical resolution. Available in 2, 4 or 8 channel models, Arb Rider AWG-5000 is the fastest  AFG (Arbitrary Function Generator) in the world, reaching up to 2 GHz sine wave. Thanks to Simple Rider software, AWG-5000 offers best in class performances and extremely easy to use interface.

      2 GHz bandwidth, up to 5Vpp output range and up to 4 Gsample memory depth, makes the AWG-5000 is the ideal choice for Physics Experiments, Quantum computers, and Aerospace & Defense applications.

      Thanks to the integrated up conversion functionality (RF MODE) it’s possible generate signals up to 6 GHz.

      No Compromise on analog performances: the fast rise time of 110ps can be achieved at maximum amplitude of 5Vpp.

      Up to 32 digital channel option, combined with 2, 4 or 8 analog channels make the AWG-5000 a full featured mix signal generator. It’s now possible generate up to 8 analog signals fully synchronized with 32 digital lines (LVTTL or LVDS standards)

      A dedicated intra-chassis synchronization bus, allow multi-instrument synchronization up to 4 units: 32 analog channels and 128 digital channels for the most powerful mixed signal generator in the world.


      Models

      ModelsAnalog ChannelsDigital ChannelsSample RateRecord LengthVertical Res.Max. Freq.Max. Output VoltageOutput Voltage Window
      AWG-506228 (opt.)1 Sa/s to 6.16 GSa/s2 or 4 Gpts16 bitsup to 6 GHz5Vpp on 50 Ohm10Vpp
      AWG-5062D28 (opt.)1 Sa/s to 6.16 GSa/s2 or 4 Gpts16 bitsup to 6 GHz1.5Vpp on 50 Ohm5.5Vpp
      AWG-5064416 (opt.)1 Sa/s to 6.16 GSa/s2 or 4 Gpts16 bitsup to 6 GHz5Vpp on 50 Ohm10Vpp
      AWG-5064D416 (opt.)1 Sa/s to 6.16 GSa/s2 or 4 Gpts16 bitsup to 6 GHz1.5Vpp on 50 Ohm5.5Vpp
      AWG-5068832 (opt.)1 Sa/s to 6.16 GSa/s2 or 4 Gpts16 bitsup to 6 GHz5Vpp on 50 Ohm10Vpp
      AWG-5068D832 (opt.)1 Sa/s to 6.16 GSa/s2 or 4 Gpts16 bitsup to 6 GHz1.5Vpp on 50 Ohm5.5Vpp
      AWG-5032D28 (opt.)1 Sa/s to 3 GSa/s2 or 4 Gpts16 bits1 GHz1.5Vpp on 50 Ohm5.5Vpp
      AWG-5034D416 (opt.)1 Sa/s to 3 GSa/s2 or 4 Gpts16 bits1 GHz1.5Vpp on 50 Ohm5.5Vpp
      AWG-5038D832 (opt.)1 Sa/s to 3 GSa/s Ohm2 or 4 Gpts16 bits1 GHz1.5Vpp on 50 Ohm5.5Vpp

      Pulses for All Your Needs

      Whether it is generating a complex pulse train, a series of radar pulses, pulsed RF signals with impairments, Gaussian pulses,multi-level pulses, double pulses for IGBT/Mosfet experiments, pulses for Advanced Research and Quantum computing, the AWG-5000 is the ideal partner for all your most complex tests and cutting-edge applications.

      Highlights

      • Up to 5Vpp into 50 Ohm Pulse Amplitude with ± 2.5V hardware offset

      • 110 ps Rise and Fall Time

      • Minimum Pulse Width: 230 ps

      • Shape easily your Pulse Transitions

      Features

      • Sample rate can be programmed in from 1 S/s up to 6.16 GS/s (12.32 GS/s in RF mode in 506x models only), with 16-bit vertical resolution, ensures exceptional signal integrity

      • Arbitrary waveform memory up to 4 Gpts for each analog channel

      • Mixed Signal Generation – 2, 4 or 8 Analog channels with 8, 16 or 32 synchronized Digital Channels for debugging and validating digital design.

      • Three operation modes – Simple Rider AFG (DDS AFG mode), True Arb (variable clock Arbitrary AWG mode) and SPG (Serial Pattern Generator).

      • Digital outputs provide up to 1.54 Gb/s data rate in LVDS format. LVDS to LVTTL adapter is available

      • Advance sequencer with up to 16384 user defined waveforms provides the possibility of generating complex signal scenarios with the most efficient memory usage

      • Windows based platform with 7in touch screen, front panel buttons and knob

      • Compact form factor, convenient for bench top and fully fit with 3U – 19” rackmount standard

      • LAN,USB-TMC and GPIB interfaces for remote control

      Apllication Areas

       

      Quantum Computing and RF Wireless

      The AWG-5000 is the right choice for the frontier of science and technology experiments and cutting-edge challenges like Quantum, High Energy Physics, Optical and RF Wireless Communication.

      The AWG-5000 Series instrument can create virtually any signal – analog or digital, ideal or distorted, standard or custom. You can easily build complex RF/IF/IQ waveform or generate serial data streams on your PC and transfer it to the AWG.

      Highlights

      • Minimum delay between Trigger In and Analog Out

      • Up to 32 analog channels and 128 digital channels fully synchronized

      • Built-in sequencer with conditional/unconditional/dynamic jump features, two independent Trigger Inputs, up to 4 Marker outputs


      Radar, LiDAR Design and EW

      Wideband radar and electronic warfare systems need high fidelity signals to replicate real-world situations and complex environment scenarios.

      Moreover, nowadays automotive solutions need to create accurate and reliable tests to prove safety under a variety of test conditions is key: LiDAR is one of the strategic components for these kinds of solutions.

      Key Features

      • Generate Radar  test signals with excellent spurious performance

      • Create Electronic Warfare complex scenarios with up to 16384 sequencer entries and Advanced Sequencer conditional/unconditional jumps.

      • Build up LiDAR signal testing for aerospace & defense, automotive and mobile devices solutions

      • Create test waveforms using the Waveform Editor software or import them using third-party applications like MatLab, Labview, .NET languages, etc.

       

      Waveform Editor: Powerful and Easy

      The Waveform Editor allows you to create easily the most complex shapes for your radar pulses, physical research pulses, real-world signals, and complex environment signals. It is included in the standard software package.

      Key Features

      • Generate easily the most complex analog and digital signals

      • Create your waveforms remotely on your PC

      • Full integration with the True-Arb software


      Multi-Instrument Synchronization

      You can synchronize up to 4 units to build a system made of 32 analog channels and 128 digital channels fully synchronized and integrated with the True-Arb software.

      Main Features

      • Synchronize up to 4 units: 32 Analog channels and 128 Digital channels

      • Affordable price per channel

      • Easy to use Multi-Instrument control through True-Arb software

      Specifications

      General Specifications
      Model No.AWG-5062
      AWG-5062D
      AWG-5032D      		AWG-5064
      AWG-5064D
      AWG-5034D      		AWG-5068
      AWG-5068D
      AWG-5038D
      Operation ModeAFG Mode
      True Arb Mode
      SPG Mode
      Number of Channels
      Analog
      		248
      Digital
      		0/8 opt.0/8/16 opt.0/8/16/24/32 opt.
      Markers
      		124

      Model No.AWG-5062
      AWG-5064
      AWG-5068      		AWG-5062D
      AWG-5064D
      AWG-5068D

      AWG-5032D
      AWG-5034D
      AWG-5038D
      Output Channels
      Output type
      		Single ended DC coupledDifferential DC coupled
      Output impedance
      		Single ended: 50 ΩSingle ended: 50 Ω
      Differential: 100 Ω
      Connectors
      		SMA on front panel
      DC Amplitude
      Amplitude range
      		±2.5 V (into 50 Ω)±0.75 V Se. (into 50 Ω)
      ±1.5 V Diff. (into 100 Ω)
      Resolution
      		100µV (nom), 5 digits
      Amplitude accuracy (guaranteed)
      		±(1% of |setting| + 5mV)±(1% of |setting| + 2mV)1
      DC Baseline Hardware Offset
      (Common mode offset)
      Resolution
      		< 4 mV or 4 digits
      Range (50 Ω into 50 Ω)
      		-2.5 V to +2.5 V -2 V to +2 V
      Range (50 Ω into High Z load)
      		 -2.5 V to +2.5 V -4 V to +4 V
      Accuracy (50 Ω into 50 Ω) (guaranteed)
      		± (1% of |setting| + 5 mV)
      AC Accuracy (1 kHz sine wave, 0 V offset, > 5 mVp-p amplitude, 50 Ω load) (guaranteed)± (1% of setting [Vpp] + 5mV)1
      1 The specification is guarantee in the range 0% to 90% of full sale output
      True Arb - Baseband mode specifications
      Model No.AWG-5062
      AWG-5064
      AWG-5068      		AWG-5062D
      AWG-5064D
      AWG-5068D

      AWG-5032D
      AWG-5034D
      AWG-5038D
      General specifications
      Operating Mode
      		Variable clock (True Arbitrary) – Baseband mode
      Sample Rate
      		1 S/s to 6.16 GS/s (AWG-506x/506xD, x = 2,4,8)
      1 S/s to 3 GS/s (AWG-503xD, x = 2,4,8)
      Sin(x)/x -3dB bandwidth
      		2.72 GHz @ 6.16GS/S (AWG-506x/506xD)
      1.32 GHz @ 3 GS/S (AWG-503xD)
      Run Modes
      		Continuous, Triggered Continuous, Single/Burst, Stepped, Advanced
      Vertical Resolution
      		16 bit
      Max Waveform Length
      		2G samples per channel (4G samples optional
      Waveform Granularity
      		1 if the entry length is > 416 samples
      32 if entry length is ≥ 128 and ≤ 416 samples
      Sequence Length
      		1 to 16384
      Sequence Repeat Counter
      		1 to 4294967294 or infinite
      Timer
      Range
      		 20 ns to 1.39 seconds
      Resolution
      		± 1 sampling clock cycle
      Analog Channel to Channels skew
      Range
      		0 to 2.63 us
      Resolution
      		 100 fs
      Accuracy
      		±(1% of setting + 20 ps)
      Initial skew
      		< 20 ps
      Calculated bandwidth
      (0.35 / rise or fall time)
      		≥ 2 GHz≥ 2.2 GHz (AWG–506xD)
      ≥ 1.1 GHz (AWG-503xD)
      SFDR @ 100 MHz (measured across DC to Fs/2, excluding fsa - 2*fout and fsa- 3*fout and excluding harmonic.

      Fsa= 6.16 Gsa/s for AWG-506x(D) models
      Fsa= 3 Gsa/s for AWG-503xD models
      		< -80 dBc< - 90 dBc
      SFDR (measured across DC to Fs/2, excluding fsa - 2*fout and fsa- 3*fout and excluding harmonic.

      Fsa= 6.16 Gsa/s for AWG-506x(D) models
      Fsa= 3 Gsa/s for AWG-503xD models      		1μHz to ≤ 600MHz: < -80dBc
      600MHz to ≤ 1.5GHz: < -75dBc
      1.5GHz to ≤ 2GHz: < -65dBc
      2GHz to ≤ 3GHz: < -55dBc      		1μHz to < 100MHz: < -90dBc
      100MHz to ≤ 600MHz: < -82dBc
      600MHz to ≤ 1.5GHz: < -75dBc
      1.5GHz to ≤ 2GHz: < -70dBc
      2GHz to ≤ 3GHz: < -62dBc
      Rise/fall time (1 Vp-p single-ended 10% to 90%)≤ 175 ps≤ 155 ps (AWG–506xD)
      ≤ 320 ps (AWG – 503xD)
      Rise/fall time (1 Vp-p single-ended 20% to 80%)≤ 110 ps≤ 100 ps (AWG–506xD)
      ≤ 200 ps (AWG–503xD)
      Overshoot (1 Vp-p single-ended)<5%<6%
      Random jitter on clock pattern (rms, typical)< 2 ps
      True Arb - RF Mode specifications (optional for AWG–506x/506xD only)
      Model No.AWG-5062
      AWG-5064
      AWG-5068      		AWG-5062D
      AWG-5064D
      AWG-5068D
      General specifications
      Operating Mode
      		Variable clock (True Arbitrary) – RF mode
      incluOutput Sample Rate
      		8.5 GS/s to 12.32 GS/s
      Sin(x)/x
      		5.04 Ghz @ 12.32GS/S
      RF Modulation
      		I/Q quadrature
      RF Carrier count per output channel
      		Single Carrier (2 components I0,Q0 for channel)
      Double Carrier (4 components, I0,Q0 and I1,Q1 for channel)
      RF Carrier Frequency range
      		0 up to 6 GHz
      RF Carrier Frequency resolution
      		1 mHz
      RF Carrier Phase
      		Programmable
      I/Q Component Data Rate
      		1/8 of the Output Sample rate
      I/Q Component Prescaler
      		0 to 2^32
      Run Modes
      		Continuous, Triggered Continuous, Single/Burst, Stepped, Advanced
      I/Q Component Vertical Resolution
      		16 bit
      I/Q Component Waveform Length
      		32M to 500M samples for component
      (up to 1G samples optional)
      I/Q Component Waveform Granularity
      		1 if the entry length is > 104 samples
      8 if entry length is ≥ 32 and ≤ 104 samples
      Sequence Length
      		1 to 16384
      Sequence Repeat Counter
      		1 to 4294967294 or infinite
      Timer
      Range
      		20 ns to 1.39 seconds
      Resolution
      		± 1 Component sampling clock cycle
      I/Q Component to Component skew
      Range
      		0 to [16200 * 8/Output Sampling Clock] s
      Resolution
      		 [8/Output Sampling Clock] s
      Accuracy
      		±(1% of setting + 20 ps)
      Initial skew
      		< 20 ps
      AFG Mode Specifications
      Model No.AWG-5062
      AWG-5064
      AWG-5068      		AWG-5062D
      AWG-5064D
      AWG-5068D

      AWG-5032D
      AWG-5034D
      AWG-5038D
      General Specifications
      Amplitude
      Range
      		0 to 5Vpp (into 50 Ω)0 to 3Vpp Diff. (into 100 Ω)
      0 to 1.5Vpp Se. (into 50 Ω)
      Resolution
      		100µV (nom), 5 digits
      Operating mode
      		DDS mode
      Standard Waveforms
      		Sine, Square, Pulse, Ramp, more (Noise, DC, Sin(x)/x, Gaussian, Lorentz, Exponential Rise, Exponential Decay, Haversine
      Run Modes
      		Continuous, modulation, sweep, burst
      Arbitrary Waveforms
      		Vertical resolution: 16-bit
      Waveform length: 16,384 points
      Internal Trigger Timer
      Range
      		10.4 ns to 88 s
      Resolution
      		80 ps
      Accuracy
      		 ±(0.1% setting + 5 ps)
      Sine Waves
      Frequency Range Sine (50 Ω into 50 Ω) 2
      		1 μHz to ≤ 1 GHz: 5Vpp
      1 GHz to ≤ 2 GHz: 4Vpp      		AWG–506xD:
      1 μHz to ≤ 2 GHz: 3Vpp Diff.
      1 μHz to ≤ 2 GHz: 1.5Vpp Se.

      AWG–503xD:
      1 μHz to ≤ 1 GHz: 3Vpp Diff.
      1 μHz to ≤ 1 GHz: 1.5Vpp Se.
      2 Amplitude doubles on HiZ load
      Flatness
      		DC to 2 GHz: ±0.5 dB
      (1 Vpp, relative to 1 kHz)      		AWG–506xD:
      DC to 2 GHz: ±0.5 dB
      (1 Vpp diff., relative to 1 kHz)

      AWG–503xD:
      DC to 1 GHz: ±0.5 dB
      (1 Vpp diff., relative to 1 kHz)
      Harmonic Distortion (1 Vp-p)
      		1μHz to ≤ 20kHz < -75dBc
      20kHz to ≤ 400MHz < -70dBc
      400MHz to ≤ 1GHz < -60dBc
      1GHz to ≤ 2GHz < -55dBc      		-
      Total Harmonic Distortion (1 Vp-p)
      		10 Hz to 20 kHz < 0.05%-
      Spurious (measured across DC to 3.08Ghz for AWG-506x/606xD models and DC to 1.5Ghz for AWG-503x models) 3
      		1μHz to ≤ 500MHz: < -75dBc
      500MHz to ≤ 1.5GHz: < -70dBc
      1.5 GHz to ≤ 2GHz: < -55 dBc      		1μHz to ≤ 250MHz: < -85dBc
      250MHz to ≤ 500MHz: < -80dBc
      500MHz to ≤ 1.5GHz: < -70 dBc
      1.5 GHz to ≤ 2GHz: < -60 dBc
      3 For AWG-5062/5064/5068 models the spurious are evaluated @ 1Vpp single ended nominal output amplitude. For AWG5062D/5064D/5068D models and 5032D/5034D/5038D the SFDR is evaluated @ 1Vpp differential nominal output amplitude provided to the spectrum analyzer through a Minicircuit TC1-1-13M+ balun.
      Phase Noise (1 Vp-p, 10 kHz offset)
      		20 MHz: < -127 dBc/Hz typ.
      100 MHz: < -123 dBc/Hz typ.
      1 GHz: < -105 dBc/Hz typ.
      Square Waves
      Frequency Range
      		1μHz to ≤ 770 MHzAWG–506xD:
      1 μHz to ≤ 770 MHz

      AWG–503xD:
      1 μHz to ≤ 385 MHz
      Rise/fall time (10% to 90%)
      		400 ps (AWG–506x/506xD)
      800 ps (AWG–503xD)
      Rise/fall time (20% to 80%)
      		300 ps (AWG–506x/506xD)
      600 ps (AWG–503xD)
      Overshoot (1 Vp-p)
      		<2%
      Jitter (rms)
      		<2 ps
      Pulse Waves
      Frequency Range
      		1μHz to ≤ 770 MHzAWG–506xD:
      1 μHz to ≤ 770 MHz

      AWG–503xD:
      1 μHz to ≤ 385 MHz
      Pulse width
      		500 ps to (Period – 500 ps)4 (AWG–506x/506xD)
      1 ns to (Period – 1 ns)5 (AWG–503xD)
      4 Below 500 ps width, the pulse amplitude will have some reduction respect to the set value
      5 Below 1ns width, the pulse amplitude will have some reduction respect to the set value
      Pulse width Resolution
      		20 ps or 15 digits
      Pulse duty
      		0.1% to 99.9% (limitations of pulse width apply)
      Leading/trailing edge transition time (10% to 90%)
      		400 ps to 1000 s (AWG–506x/506xD)
      800 ps to 1000 s (AWG–503xD)
      Leading/trailing edge transition time (20% to 80%)
      		300 ps to 1000s (AWG–506x/506xD)
      600 ps to 1000s (AWG–503xD)
      Transition time Resolution
      		2 ps or 15 digits
      Overshoot (1 Vp-p)
      		< 2%
      Jitter (rms, with rise and fall time ≥ 400ps)
      		<2 ps
      Double Pulse Waves
      Frequency Range
      (Where Vpp= |Vpp1| + |Vpp2|)
      		1μHz to ≤ 385 MHz: 10VppAWG–506xD:
      1 μHz to ≤ 385 MHz: 6Vpp Diff.
      1 μHz to ≤ 385 MHz: 3Vpp Se.

      AWG–503xD:
      1 μHz to ≤ 192.5MHz: 6Vpp Diff.
      1 μHz to ≤ 192.5 MHz: 3Vpp Se.
      Other Pulse Parameters
      		Same as Pulse Waves
      Ramp Waves
      Frequency Range
      		1 μHz to 75 MHz (AWG–506x/506xD)
      1 μHz to 37.5 MHz (AWG–503xD)
      Linearity (< 10 kHz, 1 Vp-p, 100%)
      		≤ 0.1%
      Symmetry
      		0% to 100%
      Other Waves
      Frequency Range
      Exponential Rise, Exponential Decay
      		1 μHz to 75 MHz (AWG–506x/506xD)
      1 μHz to 37.5 MHz (AWG–503xD)
      Sin(x)/x, Gaussian, Lorentz, Haversine
      		1 μHz to 150 MHz (AWG–506x/506xD)
      1 μHz to 75 MHz (AWG–503xD)
      Additive Noise
      Bandwidth (-3 dB)
      		 2 GHz
      Level
      		0 V to 2.5 V - abs(carrier max value [Vpk])0 V to 0.75 V Single Ended - abs(carrier max value [Vpk])
      0 V to 1.5 V Differential - abs(carrier max value [Vpk])
      Resolution
      		1 mV
      Arbitrary
      Number of Samples
      		 2 to 16384
      Frequency range
      		 1 μHz to ≤ 770 MHz (AWG–506x/506xD)
      1 μHz to ≤ 385 MHz (AWG–503xD)
      Analog Bandwidth (-3 dB)
      		950 MHz (AWG–506x/506xD)
      470 MHz (AWG–503xD)
      Rise/fall time (10% to 90%)
      		400 ps (AWG–506x/506xD)
      800 ps (AWG–503xD)
      Rise/fall time (20% to 80%)
      		300 ps (AWG–506x/506xD)
      600 ps (AWG–503xD)
      Jitter (rms)
      		< 2 ps
      Frequency Resolution
      Sine, square, pulse, arbitrary, Sin(x)/X Gaussian, Lorentz, Exponential Rise, Exponential Decay, Haversine
      		1 μHz or 15 digits
      1 μHz or 14 digits
      Frequency Accuracy
      Non-ARB
      		± 2.0 ppm of setting | ± 500 ppb of setting (Opt.)
      ARB
      		± 2.0 ppm of setting ±1 μHz | ± 500 ppb of setting ±1 μHz(Opt.)
      Modulations
      Amplitude Modulation (AM)
      Carrier waveforms
      		Standard waveforms (except Pulse, DC and Noise), ARB
      Modulation source
      		Internal or external
      Internal modulating waveforms
      		Sine, Square, Ramp, Noise, ARB
      Modulating frequency
      		Internal: 500 μHz to 61 MHz, External: 10 MHz max.
      Depth
      		0.00% to 120.00%
      Frequency Modulation (FM)
      Carrier waveforms
      		Standard waveforms (except Pulse, DC and Noise), ARB
      Modulation source
      		Internal or external
      Internal modulating waveforms
      		Sine, Square, Ramp, Noise, ARB
      Modulating frequency
      		Internal: 500 μHz to 61 MHz, External: 10 MHz max.
      Peak deviation
      		DC to 2 GHz (AWG–506x/506xD)
      DC to 1 GHz (AWG–503xD)
      Phase Modulation (PM)
      Carrier waveforms
      		Standard waveforms (except Pulse, DC and Noise), ARB
      Modulation source
      		Internal or external
      Internal modulating waveforms
      		Sine, Square, Ramp, Noise, ARB
      Modulating frequency
      		Internal: 500 μHz to 61 MHz, External: 10 MHz max.
      Phase deviation range
      		 0° to 360°
      Frequency Shift Keying (FSK)
      Carrier waveforms
      		Standard waveforms (except Pulse, DC and Noise), ARB
      Modulation source
      		Internal or external
      Internal modulating waveforms
      		Square
      Key rate
      		 Internal: 500 μHz to 61 MHz, External: 10 MHz max.
      Hop frequency
      		DC to 2 GHz (AWG–506x/506xD)
      DC to 1 GHz (AWG–503xD)
      Number of keys
      		2
      Phase Shift Keying (PSK)
      Carrier waveforms
      		Standard waveforms (except Pulse, DC and Noise), ARB
      Modulation source
      		Internal or external
      Internal modulating waveforms
      		Square
      Key rate
      		Internal: 500 μHz to 61 MHz, External: 10 MHz max.
      Hop phase
      		 0° to +360°
      Number of keys
      		 2
      Pulse Width Modulation (PWM)
      Carrier waveforms
      		Pulse
      Modulation source
      		 Internal or external
      Internal modulating waveforms
      		Sine, Square, Ramp, Noise, ARB
      Modulating frequency
      		Internal: 500 μHz to 61 MHz, External: 10 MHz max.
      Deviation range
      		0% to 50% of pulse period
      Sweep
      Type
      		Linear, Logarithmic, staircase, and user defined
      Waveforms
      		 Standard waveforms (except Pulse, DC and Noise), ARB
      Sweep time
      		30 ns to 2000 s
      Hold/return times
      		0 to (2000 s – 30 ns)
      Sweep/hold/return time resolution
      		 15 ns or 12 digits
      Total sweep time accuracy
      		 ≤ 0.4%
      Start/stop frequency range
      		AWG–506x/506xD:
      Sine: 1 μHz to 2 GHz, Square: 1 μHz to 770 MHz

      AWG–503xD:
      Sine: 1 μHz to 1 GHz, Square: 1 μHz to 385 MHz
      Trigger source
      		Internal/External/Manual
      Burst
      Waveforms
      		Standard waveforms (except DC and Noise), ARB
      Type
      		Trigger or gated
      Burst count
      		1 to 4,294,967,295 cycles or Infinite
      Data Pattern Generator (DPG) Specifications – Optional
      for AWG 506X/506XD models only (where X= 2,4,8)
      Model No.AWG-5062
      AWG-5064
      AWG-5068      		AWG-5062D
      AWG-5064D
      AWG-5068D
      General Specifications
      Operating mode
      		NRZ, RZ or R1 bitstream Pattern generator
      Pattern types
      		Clock Pattern, Custom Pattern, PRBS pattern, Go-Through Pattern, Pulse Pattern
      Run Modes
      		Continuous, modulation, burst (Triggered, Gated, Continuous triggered)
      Internal Trigger Timer
      Range
      		10.4 ns to 88 s
      Resolution
      		80 ps
      Accuracy
      		±(0.1% setting + 5 ps)
      Transition Specifications
      Tansition peculiarity
      		Arbitrarily user defined transition shapes
      Programmable duration for any transition
      Transitions types
      		Arbitrary, predefined
      Transitions memory length
      		64 points
      Predefined transition Shapes
      		Sine, Square, Pulse, Ramp_up, Ramp_down, DC, Sin(x)/x, Gaussian, Lorentz, Exponential Rise, Exponential Decay, Haversine
      Transition duration[0-100%]
      		500ps to Symbol duration for Custom,PRBS and Go-Through pattern
      500ps to Period/2 for Clock Pattern
      500ps to (Period-500ps) for Pulse Pattern
      Clock Pattern
      Max clock pattern frequency
      		750 MHz
      Pattern levels
      		2 levels
      Overshoot (1 Vp-p)
      		< 2%
      Jitter (rms)
      		< 2 ps
      Custom Pattern
      Max custom pattern rate
      		Up to 1,5 Gbaud
      Pattern levels
      		2, 3 or 4 levels
      Predefined custom patterns
      		Zero, one, clock, counter
      Pattern memory
      		Up to 2 MBit (2 levels)
      Up to 1 MSymbols (3 or 4 levels)
      Pattern length resolution
      		1 bit
      Min pattern length
      		4 bits
      Overshoot (1 Vp-p)
      		< 2%
      PRBS Pattern
      Max PRBS pattern rate
      		Up to 1,5 Gbaud
      Pattern levels
      		2 levels
      PRBS types
      		 PRBS -7,9,11,15,23,31
      Overshoot (1 Vp-p)
      		 < 2%
      Go-Through Pattern
      Max Go-Through pattern rate
      		Up to 1,5 Gbaud
      Pattern levels
      		2,3 or 4 levels
      Max External Pattern Rate
      		Up to 10Mbit/s
      Overshoot (1 Vp-p)
      		< 2%
      Pulse Pattern
      Max Pulse pattern frequency
      		Up to 1 GHz
      Pattern levels
      		2 Levels
      Min Rise/Fall time (0-100%)
      		500 ps
      Min Pulse Width
      		1 ns
      Overshoot (1 Vp-p)
      		< 2%
      Pattern Modulation
      Amplitude Modulation (AM) 
      Carrier patterns
      		All types
      Modulation source
      		Internal or external
      Internal modulating waveforms
      		Sine, Square, Triangular, Ramp_up, Ramp_down, DC, Sin(x)/x, Gaussian, Lorentz, Exponential Rise, Exponential Decay, Haversine, Noise, ARB
      Modulating frequency
      		Internal: 500 μHz to 61 MHz, External: 10 MHz max.
      Depth
      		0.00% to 120.00%
      Frequency Modulation (FM)
      Carrier patterns
      		All types
      Modulation source
      		Internal or external
      Internal modulating waveforms
      		Sine, Square, Triangular, Ramp_up, Ramp_down, DC, Sin(x)/x, Gaussian, Lorentz, Exponential Rise, Exponential Decay, Haversine, Noise, ARB
      Modulating frequency
      		Internal: 500 μHz to 61 MHz, External: 10 MHz max
      Peak deviation
      		DC to 300 MSymbols/s
      Phase Modulation (PM)
      Carrier patterns
      		All types
      Modulation source
      		Internal or external
      Internal modulating waveforms
      		Sine, Square, Pulse, Ramp_up, Ramp_down, DC, Sin(x)/x, Gaussian, Lorentz, Exponential Rise, Exponential Decay, Haversine, Noise, ARB
      Modulating frequency
      		Internal: 500 μHz to 61 MHz, External: 10 MHz max.
      Phase deviation range
      		0° to 360°
      Frequency Shift Keying (FSK) 
      Carrier patterns
      		All types
      Modulation source
      		 Internal or external
      Internal modulating waveforms
      		 Square
      Key rate
      		Internal: 500 μHz to 61 MHz, External: 10 MHz max.
      Hope Symbol Rate
      		 1uSymbols/s to 1.5 GSymbols/s for Custom and PRBS
       pattern
      1uHz to 750 MHz for Clock pattern
      Number of keys
      		2
      Phase Shift Keying (PSK) 
      Carrier patterns
      		All types
      Modulation source
      		 Internal or external
      Internal modulating waveforms
      		Square
      Key rate
      		Internal: 500 μHz to 61 MHz, External: 10 MHz max.
      Hop phase
      		0° to +360°
      Number of keys
      		2
      Burst 
      Patterns
      		All types
      Type
      		Block mode or Bit mode
      Burst count
      		 1 to 4,294,967,295 cycles or Infinite
      Timing and Clock
      Sampling Rate
      Range
      		AWG–506x/506xD:
      1 S/s Up to 6.16 GS/s
      (1 S/s to 12.32 GS/S in RF mode)

      AWG–503xD:
      1 S/s Up to 3GS/s
      Resolution
      		32 Hz
      Accuracy
      		 ± 2.0 ppm | ± 500 ppb (Opt.)
      Digital outputs (Optional)
      Output Channels
      Connectors
      		Mini-SAS HD connector on rear panel
      (custom pin-out)
      Number of connectors
      		1,2,4
      Number of outputs
      		8-bits,16-bits,32-bits
      Output impedance100 Ω differential
      Output typeLVDS
      Rise/fall time (10% to 90%)< 1 ns
      Jitter (rms)20 ps
      Maximum update rate1.54 Gbps per channel (AWG–506x/506xD)
      750 Mbps per channel (AWG–503xD)
      Memory depth512M Samples per digital channel (up to 1G optional)
      TOP