產品明細

RTC1000

示波器

    產品簡述
    ♦ 測試頻寬:50 MHz to 300 MHz
    ♦ 最大取樣率:  2 Gsample/s
    ♦ 最大記憶深度: 2 Msample
    ♦ MSO: 8 digital channels, optional, retrofittable
    ♦ Pattern 產生器: 4-bit patterns up to 50 Mbit/s
      詢價

      產品詳細介紹Product Introduction

      AT A GLANCE AT A GLANCE

      High sensitivity, multifunctionality and a great price – that is what makes the R&S®RTC1000 oscilloscope so special.

      From embedded developers to service technicians to educators – the wide range of functions address a broad group of users. State-of-the-art, high-performance technology in an extremely silent design meets the high requirements of today’s customers. These oscilloscopes include a wide range of upgrade options, providing true investment protection for the future.

      The R&S®RTC1000 is an X-in-one instrument that offers the functionality of an oscilloscope, logic analyzer, protocol analyzer, frequency analyzer, pattern generator, function generator, digital voltmeter and component tester in a single instrument.
       
      Available models
      		BandwidthChannelsSample rateMax. Memory depthOptional MSO
      R&S®RTC100250 MHz22 Gsample2 Mpts8 digital channels
      R&S®RTC1002
      + RTC-B220      		70 MHz22 Gsample2 Mpts8 digital channels
      R&S®RTC1002
      + RTC-B221      		100 MHz22 Gsample2 Mpts8 digital channels
      R&S®RTC1002
      + RTC-B222      		200 MHz22 Gsample2 Mpts8 digital channels
      R&S®RTC1002
      + RTC-B223      		300 MHz22 Gsample2 Mpts8 digital channels

      Features:
      • Top-class hardware-based acquisition for precise measurement results
        • Up to 2 Gsample sampling rate
        • 2 Msample memory depth
        • Low-noise measurement due to state-of-the-art A/D converters
      • Versatile measurement functions and fast results
        • Wide selection of automatic measurement functions
        • QuickView: key results at the press of a button
        • Mask test: easy creation of a new mask with just a few keystrokes
        • FFT: the easy way to analyze the signal spectrum
      • X-in-1 oscilloscope
        • Oscilloscope
        • Logic analyzer
        • Protocol analyzer
        • Waveform and pattern generator
        • Digital voltmeter
        • Component tester
        • Frequency analysis mode
        • Mask test mode
      • Future-ready investment and scalability
        • Free firmware updates
        • Bandwidth upgrades as required
        • Serial bus analysis options via software licenses

      Specifications:
      Specifications in brief
      Vertical system
      Number of channels 2
      Bandwidth
      (–3 dB)      		 R&S®RTC1002 (with R&S®RTC-B220/-B221/-B222/-B223) 50 MHz/70 MHz/100 MHz/200 MHz/300 MHz
      Rise time
      (calculated)      		 R&S®RTC1002 (with R&S®RTC-B220/-B221/-B222/-B223) 7 ns/5 ns/3.5 ns/1.75 ns/1.15 ns
      Input impedance 1 MΩ ± 2% || 14 pF ± 2 pF
      Input sensitivity maximum bandwidth in all ranges 1 mV/div to 10 V/div
      DC gain accuracyoffset and position = 0, maximum operating temperature change of ±5°C after self-alignment
        input sensitivity all ranges 3%
      Acquisition system
      Maximum realtime sampling rate 1 Gsample/s, 2 Gsample interleaved
      Acquisition memory 1 Msample, 2 Msample interleaved
      Horizontal system
      Timebase range 1 ns/div to 100 s/div
      Trigger system
      Trigger types standard edge, width, video (PAL, NTSC, SECAM, PAL-M, SDTV, HDTV), pattern, timeout
      option I2C, SPI, UART/RS-232/RS-422/RS-485, CAN/LIN
      Analysis and measurement functions
      QuickView At the push of a button, internal measurement values are written directly onto the waveform and updated continuously. peak-to-peak voltage, pos./neg. peak, rise/fall time, mean value, RMS value, time, frequency
      Automated measurementsburst width, count positive/negative pulses, count falling/ rising edges, mean value, RMS cycle, RMS, mean cycle, peak±, frequency, period, amplitude, base level, pos./neg. overshoot, pulse width, duty cycle±, rise/time, delay, phase
      Waveform mathematics addition, subtraction, multiplication, division, FFT
      MSO option
      Digital channels 8 (1 logic probe)
      Sampling rate 1 Gsample/s
      Acquisition memory 1 Msample
      Waveform generator option
      Resolution, sampling rate 8 bit, 978 ksample/s
      Amplitude high Z; 50 Ω 60 mV to 6 V (Vpp); 30 mV to 3 V (Vpp)
      DC offset sine 0.1 Hz to 50 kHz
      pulse/rectangle and ramp/triangle 0.1 Hz to 10 kHz
      4-bit pattern generator option
      Programmable pattern sample time 20 ns to 42 s, up/down
      memory depth 2048 sample
      4-bit counter frequency 100 mHz to 50 MHz
      Square wave frequency 1 mHz to 500 kHz
      Digital voltmeter
      Measurements DC, AC + DC (RMS), AC (RMS)resolution up to 3 digits
      Frequency counter
      Resolution 5 digits
      General data
      Screen 6.5" VGA color display (640 × 480 pixel)
      Interfaces1 × USB host, USB device, LAN
      Audible noise maximum sound pressure level at a distance of 0.3 m 30.4 dB(A)
      Dimensions W × H × D 285 mm × 175 mm × 140 mm
      (11.22 in × 6.89 in × 5.51 in)
      Weight 1.7 kg (3.75 lb)
      TOP