產品明細

RTO2000

示波器

    產品簡述
    ♦ 測試頻寬: 600 MHz to 6 GHz
    ♦ 最大取樣率: 20 Gsample/s
    ♦ 最大記憶深度: 2 Gsample
    ♦ 垂直解析度: Up to 16-bit
    ♦ MSO: 16 digital channels, optional, retrofittable
      詢價

      產品詳細介紹Product Introduction

      AT A GLANCE

      R&S®RTO oscilloscopes combine excellent signal fidelity, up to 16-bit vertical resolution and high acquisition rate in a compact device format in the 600 MHz to 6 GHz class. They offer a fully integrated multi-domain test solution with frequency, protocol and logic analysis functions. The brilliant touchscreen makes the oscilloscopes very comfortable to use.

      R&S®RTO oscilloscopes are optimized to perform precise measurements at a high input sensitivity and very low inherent noise. The unique high definition mode enables up to 16-bit resolution. With an acquisition rate of up to one million waveforms per second, the R&S®RTO oscilloscopes detect sporadic signal faults lightning fast.

      R&S®RTO oscilloscopes are engineered for multi-domain challenges and facilitate debugging of systems with different signal types. The oscilloscopes enable simultaneous time, frequency, logic and protocol analysis and display the results referenced over time. For the first time, a special tool is available for these applications: a zone trigger that can be used in both the time domain and in the frequency domain.

      R&S®RTO oscilloscopes are extremely easy to use. Gesture operation simplifies measurement tasks. You can even customize the waveform display thanks to R&S®SmartGrid technology. The app cockpit provides fast access to all available applications.

      Available ModelsBandwidthChannelsSample rateMax. Memory depthOptional MSO
      R&S®RTO2002600 MHz210 Gsample/s2 Gpts16 digital channels
      R&S®RTO2004600 MHz410 Gsample/s2 Gpts16 digital channels
      R&S®RTO20121 GHz210 Gsample/s2 Gpts16 digital channels
      R&S®RTO20141 GHz410 Gsample/s2 Gpts16 digital channels
      R&S®RTO20222 GHz210 Gsample/s2 Gpts16 digital channels
      R&S®RTO20242 GHz410 Gsample/s2 Gpts16 digital channels
      R&S®RTO20323 GHz210 Gsample/s2 Gpts16 digital channels
      R&S®RTO20343 GHz410 Gsample/s2 Gpts16 digital channels
      R&S®RTO20444 GHz420 Gsample/s2 Gpts16 digital channels
      R&S®RTO20646 GHz420 Gsample/s2 Gpts16 digital channels

      Features:
      • BEST OSCILLOSCOPE PERFORMANCE
        • Precise measurements due to very low noise level
        • Up to 16-bit vertical resolution
        • Trigger on any signal detail you can see
        • Quickly find signal faults with 1 million waveforms/s
        • Integrated spectrum analysis
      • WIDEST RANGE OF CAPABILITIES
        • Industry-leading 2 Gsample deep memory
        • First zone trigger in time and frequency domain
        • Analyze previous acquisitions – always available in history buffer
        • Deep toolset for signal analysis
      • ADVANCED USER INTERFACE
        • High-resolution capacitive touchscreen with gesture support
        • Easily customizable waveform display with R&S®SmartGrid technology
        • Fast access to important tools
        • Clear orientation thanks to color coding
        • App cockpit to quickly set up analysis functions
      • POWER INTEGRITY MEASUREMENTS
        • Large DC offsets with high-fidelity probes
        • Accurately measure ripple and PARD
        • Find coupled sources
      • POWER MEASUREMENTS AND ANALYSIS
        • Measurement wizard for fast results
        • Harmonic current analysis in line with EN, MIL and RTCA standards
        • Easy and clear documentation of measurement results
      • MSO ANALYSIS: UNRIVALED IN ITS CLASS
        • Every R&S®RTO can be enhanced to include a mixed signal option
        • More signal details thanks to high time resolution over the entire memory depth
        • Precise triggering on signal events
      • HIGH DEFINITION: SEE MORE WITH UP TO 16-bit RESOLUTION
        • Increased resolution for precise measurement of small signal amplitudes
        • 16-bit vertical resolution available
        • No aliasing
        • Real-time triggering on smallest signal details
      • SPECTRUM ANALYSIS
        • Multichannel spectrum analysis
        • Set up as a spectrum analyzer
        • Zone trigger for time and frequency domain
      • EMI DEBUGGING
        • EMI tests during development
        • High dynamic range and sensitivity
        • Visualizing sporadic emissions
      • SIGNAL ANALYSIS
        • Real-time conversion of modulated signals to I/Q data
        • Precise wideband RF signal analysis
        • Advanced signal analysis
      • INTEGRATED ARBITRARY WAVEFORM GENERATOR
        • Every R&S®RTO can be enhanced to include a 100 MHz arbitrary waveform generator
        • Single-ended and differential interface stimulation
        • Test your device with native signals
      • 16 GHz DIFFERENTIAL PULSE SOURCE
        • Differential pulse signal with configurable parameters
        • Application as DUT stimulus or for deskewing
        • TDR/TDT analysis
      • SERIAL PROTOCOLS: EASY TRIGGERING AND DECODING
        • Easy configuration with the app cockpit
        • Isolate protocol events with the protocol-specific trigger
        • Symbols support standard CAN-dbc and FIBEX formats
      • AUTOMATIC COMPLIANCE TESTS
        • Easy configuration and automatic control
        • Flexible test execution
        • Straightforward, configurable reports
      • SIGNAL INTEGRITY ANALYSIS
        • Powerful basic jitter analysis functions
        • Deep system insights with jitter and noise decomposition
        • Powerful analysis options
        • Clock data recovery for analyzing embedded clock signals in real time
      • EXTENSIBLE FOR FUTURE APPLICATIONS
        • On-site configuration of hardware options
        • Software applications on demand
        • Always up-to-date thanks to firmware updates
      • POWERFUL PROBES
        • Extensive probe range for all measurement tasks
        • Addressing high speed probing challenges
        • Complete probe portfolio for power measurements

      Specifications:
      Specifications in brief
      Vertical system
      Number of channels R&S®RTO2002/2012/2022/2032 2
      R&S®RTO2004/2014/2024/2034/2044/2064 4
      Analog bandwidth (–3 dB)
      and rise time at 50 Ω      		R&S®RTO2002 and R&S®RTO2004 600 MHz 583 ps
      R&S®RTO2012 and R&S®RTO2014 1 GHz 350 ps
      R&S®RTO2022 and R&S®RTO2024 2 GHz 175 ps
      R&S®RTO2032 and R&S®RTO2034 3 GHz 116 ps
      R&S®RTO2044 4 GHz 100 ps
      R&S®RTO2064 on 4 channels: 4 GHz,
      on 2 channels: 6 GHz      		 76 ps
      All instruments can be extended to up to 6 GHz bandwidth.
      Impedance50 Ω ± 1.5%, 1 MΩ ± 1% at 15 pF (meas.)
      Input sensitivitymax. bandwidth in all ranges50 Ω: 1 mV/div to 1 V/div, 500 μV to 1 V (optional);
      1 MΩ: 1 mV/div to 10 V/div, 500 μV to 10 V (optional)
      ENOB of A/D converterfull-scale sine wave, < –3 dB frequency bandwidth > 7 bit (meas.)
      Acquisition system
      Real-time sampling rateR&S®RTO200x/201x/202x/203x max. 10 Gsample/s on each channel
      R&S®RTO2044/2064 max. 10 Gsample/s on 4 channels,
      max. 20 Gsample/s on 2 channels
      Acquisition memorystandard configuration,
      per channel/1 channel active      		R&S®RTO 2-channel model: 50/100 Msample,
      R&S®RTO 4-channel model: 50/200 Msample
      max. upgrade (R&S®RTO-B110 option),
      per channel/1 channel active      		R&S®RTO 2-channel model: 1/2 Gsample,
      &S®RTO 4-channel model: 1/2 Gsample
      Max. acquisition rate continuous acquisition and display,
      10 Gsample/s, 1 ksample       		1000000 waveforms/s
      ultra-segmented mode < 300 ns blind time
      Decimation modeany combination of decimation mode and waveform arithmetics on up to 3 waveforms per channelsample, peak detect, high resolution, root mean square
      Waveform arithmetics off, envelope, average
      Interpolation modes linear, sin(x)/x, sample&hold
      Horizontal system
      Timebase range 25 ps/div to 10000 s/div
      Accuracy after delivery/calibration ±5 ppm
      R&S®RTO-B4 option ±0.02 ppm
      Trigger system
      Trigger typesedge, glitch, width, runt, window, timeout, interval, slew rate, data2clock, pattern, state, serial pattern, TV/video, serial bus trigger (optional), zone trigger (optional)
      Zone trigger (optional)logical combination of max. 8 polygons, intersect or not intersect source: measurement channels, spectrum, math functions
      Sensitivity definition of trigger hysteresis automatic or manually adjustable from 0 div to 5 div
      General data
      Dimensions W × H × D 427 mm × 249 mm × 204 mm
      (16.81 in × 9.8 in × 8.03 in)
      Weight 9.6 kg (21.2 lb)
      Screen 12.1" LC TFT capacitive color touchscreen, 1280 × 800 pixel (XGA)
      Interfaces1 Gbps LAN, type A: 2 × USB 3.1, 2 × USB 2.0, type B: 1 × USB 3.1, GPIB (optional), DVI and display port for external monitor, external trigger, trigger output
      TOP