產品明細

RTP

示波器

產品簡述

♦ 測試頻寬: 4 GHz to 16 GHz
♦ 最大取樣率: 40 Gsample/s
♦ 最大記憶深度: 2 Gsample
♦ 垂直解析度: Up to 16-bit
♦ 全頻帶觸發

詢價

產品詳細介紹Product Introduction

AT A GLANCE

Benefit from the advanced technology in the R&S®RTP oscilloscope. Customized frontend ASICs and realtime processing hardware enable highly accurate measurements up to 16 GHz with unprecedented speed in a compact form factor.

The R&S®RTP high-performance oscilloscope combines high-class signal integrity with fast acquisition and analysis. The Rohde&Schwarz designed frontend components offer an expandable oscilloscope platform from 4 GHz to 16 GHz. Dedicated acquisition and processing ASICs enable an unprecedented high acquisition and processing rate of 750000 waveforms/s. The high-precision digital trigger catches the smallest signal anomalies and operates with the hardware based clock data recovery (CDR) on embedded clock signals up to the industry-leading data rate of 16 Gbps.

The R&S®RTP is the world’s first oscilloscope to compensate the impairment of the signal contacting in real time while maintaining the high acquisition rate. Hardware based compensation filters are configured using user-applied S-parameters. The real-time math module directly after the compensation filters makes it possible to even trigger on deembedded differential and common mode signals.

Available Models	Bandwidth	Channels	Sample rate	Max. Memory depth	Optional MSO
R&S®RTP044	4 GHz	4	40 Gsample/s	2 Gpts	16 digital channels
R&S®RTP064	6 GHz	4	40 Gsample/s	2 Gpts	16 digital channels
R&S®RTP084	8 GHz	4	40 Gsample/s	2 Gpts	16 digital channels
R&S®RTP134	13/8 GHz	2/4	40 Gsample/s	2 Gpts	16 digital channels
R&S®RTP164	16/8 GHz	2/4	40 Gsample/s	2 Gpts	16 digital channels

Features:

REAL-TIME SIGNAL INTEGRITY - HIGH-PERFORMANCE FRONTEND
- Flat frequency response and high SFDR for precise and fast measurements
- High input sensitivity of 2 mV/div for small signals
- High temperature stability for consistent results
- Low intrinsic jitter
REAL-TIME DEEMBEDDING
- Deembedding in real time for fast results
- Correction of cascaded signal paths
- Triggering on corrected signals
- Real-time math for differential signals
- Full bandwidth for all trigger types
HARDWARE-ACCELERATED PROCESSING FOR FAST RESULTS
- Quickly find signal faults with > 750 000 waveforms/s
- Increase real-time resolution with 16-bit HD mode
- Analyze high speed serial signals with the serial pattern trigger and 16 Gbps clock data recovery
- Fast eye mask test and histogram
COMPREHENSIVE ANALYSIS TOOLS
- Jitter and noise analysis
  - Powerful basic jitter analysis functions
  - Deep system insights with jitter and noise decomposition
- Automatic compliance tests
  - Easy configuration and automatic control with R&S®ScopeSuite
  - Flexible test execution
  - Configurable reports for result documentation
- Frequency domain analysis
  - Multichannel frequency analysis
  - Frequency analysis setup made easy
  - Zone trigger in frequency display
  - Spectrogram: display changes in power and frequency over time
  - Logarithmic display
  - Automatic peak list measurement
- Wideband RF signal analysis
  - Precise wideband RF signal analysis
  - Conversion of modulated signals to I/Q data
  - Advanced RF signal analysis
MULTI-INSTRUMENT CAPABILITY
- SERIAL PROTOCOL ANALYSIS
- GENERAL PURPOSE MSO
- HIGH-PRECISION VOLTAGE AND CURRENT CHANNELS
- INTEGRATED ARBITRARY WAVEFORM GENERATOR
- 16 GHz DIFFERENTIAL PULSE SOURCE

Specifications:

Specifications in brief
Vertical system
Number of channels		4
Analog bandwidth (–3 dB)	R&S®RTP044	4 GHz
	R&S®RTP064	6 GHz
	R&S®RTP084	8 GHz
	R&S®RTP134	13 GHz (2 channels interleaved)
	R&S®RTP164	16 GHz (2 channels interleaved)
Impedance		50 Ω
Input sensitivity	max. bandwidth in all ranges	50 Ω: 2 mV/div to 1 V/div
Offset range	> 100 mV/div	±5 V
	≤ 100 mV/div	±(1.5 V – input sensitivity × 5 div)
Resolution		8 bit, up to 16 bit in HD mode
Acquisition system
Real-time sampling rate	R&S®RTP044/064/084/134/164	40 Gsample/s (2 channels interleaved) 20 Gsample/s on each channel
Acquisition memory	standard configuration	50 Msample on 4 channels; 200 Msample on 1 channel
	max. upgrade (R&S®RTP-B110 option)	1 Gsample on 4 channels; 2 Gsample on 2 channels
Max. acquisition rate	continuous acquisition and display, 40 Gsample/s, 1 ksample	> 750000 waveforms/s
Deembedding (optional)		real-time deembedding of signal path characteristics based on S-parameter
Horizontal system
Timebase range		20 ps/div to 10000 s/div
Accuracy	OCXO as standard, after delivery/calibration	±0.01 ppm
	during calibration interval	±0.1 ppm
Trigger system
Trigger types	all trigger types up to full bandwidth; based on real-time deembedding (optional)	edge, glitch, width, runt, window, timeout, interval, slew rate, data2clock, pattern, state, TV/video, serial protocol triggers (optional), zone trigger (optional), high speed serial pattern with 16 Gbps CDR (optional)
Zone trigger (optional)		logical combination of max. 8 polygons; intersect or not intersect source: measurement channels, spectrum, math functions
Sensitivity	definition of trigger hysteresis	automatic or manually adjustable from 0 div to 5 div
General data
Dimensions	W × H × D	441 mm × 285 mm × 316 mm (17.36 in × 11.22 in × 12.44 in)
Weight		18 kg (39.68 lb)
Screen		12.1" LC TFT capacitive color touchscreen, 1280 × 800 pixel (WXGA)
Option slots	2 slots on front side, 2 slots on rear side for upgrading with various hardware options	MSO (16 channels, 400 MHz), R&S®RT-ZVC (multiple high-precision voltage and current channels), arbitrary waveform generator, 16 GHz differential pulse source
Interfaces		1 Gbps LAN, type A: 4 × USB 3.1, 2 × USB 2.0, type B: 1 × USB 3.1, GPIB (standard), DVI and display port for external monitor, external trigger with active probe interface, trigger output, ref in: 1 MHz to 20 MHz, ref out: 10 MHz