產品明細

HMC804x

直流電源供應器

    產品簡述
    ♦ 可選擇單通道, 雙通道和三通道三種機型
    ♦ 最大功率: 100W (依機型)
    ♦ 每通道最大輸出電壓: 32V
    ♦ 針對每個通道單獨組合電子式保險絲, 及過電流和電壓湧入保護
    ♦ 電位隔離, 浮接和防短路輸出
    ♦     透過USB(VCP/TMC), LAN(LXI), Wireless LAN及GPIB等介面進行遠端控制
      詢價

      產品詳細介紹Product Introduction

      Compact and easy to use

      One, two or three channels – R&S®HMC804x power supplies with their specifications and wide range of functions are ideal for use in development labs and industrial environments. Thanks to their high energy efficiency, the power supplies remain cool and quiet, even at maximum load. Practical interfaces and connectors allow users to work quickly and conveniently with the R&S®HMC804x, even in 19" racks.
      The R&S®HMC804x family consists of three models with a maximum total power of up to 100W and a continuous voltage range from 0 V to 32 V. The one-channel R&S®HMC8041 delivers a maximum of 10A, the two-channel R&S®HMC8042 a maximum of 5A and the three-channel R&S®HMC8043 a maximum of 3A per channel. The two-channel and three-channel models enable users to connect multiple outputs in parallel or in series to increase the voltage or current. The outputs are galvanically isolated, floating, and protected against overloading and short circuits. Voltage, current and power values are output on a brilliant QVGA display. The R&S®HMC804x offers a wide range of logging functions, an integrated energy meter and electronic fuses that can be individually combined for each channel, making it ideal for hardware developers, labs and industrial environments. Switching technology ensures high efficiency, for minimum heat dissipation even at full load. Developers and industrial users benefit from useful functions such as sequenced start of channels, EasyArb and EasyRamp functions that are directly programmable on the device, an analog input for external control of voltage values, an external trigger input for controlling channels and arb steps, and adjustable overvoltage/overpower protection for each channel.
      All connectors, including SENSE, are available on the rear panel. A cage clamp facilitates rack installation and deinstallation. The LXI-compliant power supply can be controlled via LAN, USB or an optional GPIB interface. The CDC (virtual COM port) and TMC classes are supported for communications via USB. The remote control commands are based on the SCPI standard. The R&S®HMC804x power supplies from the Rohde&Schwarz product range offer top quality and intelligent, practical functions at an extremely attractive price.

      Available modelsNumber of output channelsMax. output powerOutput voltage per channelOutput current per channel
      R&S®HMC80411100 W0 V to 32 V10 A
      R&S®HMC8041-G5100 W0 V to 32 V10 A
      R&S®HMC80422100 W0 V to 32 V5 A
      R&S®HMC8042-G2100 W0 V to 32 V5 A
      R&S®HMC80433100 W0 V to 32 V3 A
      R&S®HMC8043-G3100 W0 V to 32 V3 A
      Features
      • Clear display of all measured parameters
        • Brilliant QVGA color display (320 x 240 pixel)
        • Realtime voltage, current and power values
        • High setting and readback resolution: 1mV and 0.1mA/1.0mA (depending on current and model)
        • Low residual ripple due to linear post regulation
        • High energy efficiency, low heat dissipation and quiet fan
      • Galvanically isolated, floating and short-circuit-proof outputs
        • Front panel: 4mm (0.16in) safety sockets (R&S®HMC8041 including SENSE)
        • Rear panel: WAGO cage clamp for all channels including SENSE
        • Convenient parallel and serial operation via V/I tracking
      • Protective functions adjustable for each channel
        • Overvoltage protection (OVP) for all outputs
        • Overpower protection (OPP) for all outputs
        • FuseLink (freely combinable electronic fuses)
        • FuseDelay (fuse activation delay)
      • Ideal power supply for hardware developers and labs
        • EasyArb function for user-definable V/I curves
        • EasyRamp for simulating a start-up curve (directly programmable on device)
        • Sequencing (sequenced start of channels)
        • Energy meter (measurement of energy output)
        • Analog input for external control via voltage (0 V to 10 V) or current (4 mA to 20mA)
        • Trigger input for starting/controlling EasyArb
        • Data logging to USB flash drive in CSV format
      • Remote control
        • USB interface (CDC/virtual COM port, TMC)
        • LAN interface, LXI-compliant ❙ Optional GPIB interface
        • Remote control via SCPI-based commands

      Specifications
      Electrical specifications
      Maximum output power100 W
      Maximum output power per channel
        R&S® HMC804333 W
        R&S® HMC804250 W
        R&S® HMC8041100 W
      Output voltage per channel
        all models0 V to 32 V
      Maximum output current per channel
        R&S® HMC80433 A
        R&S® HMC80425 A
        R&S® HMC804110 A
      Number of output channels
        R&S® HMC80433
        R&S® HMC80422
        R&S® HMC80411
      Line & load regulation
      Voltage
        R&S® HMC8043< 0.02% + 3 mV (meas.)
        R&S® HMC8042< 0.03% + 5 mV (meas.)
        R&S® HMC8041< 0.03% + 5 mV (meas.)
      Current
        R&S® HMC8043< 0.03% + 200 µA (meas.)
        R&S® HMC8042< 0.03% + 300 µA (meas.)
        R&S® HMC8041< 0.03% + 300 µA (meas.)
        Load recovery time
        (10% to 90% load change)      		< 1 ms (meas.)
      (to within a band of ±20 mV of the set voltage)
      Voltage ripple and noise (20 Hz to 20 MHz)
        R&S® HMC8043< 450 µV (RMS) /< 4 mV (peak to peak) (meas.)
        R&S® HMC8042< 450 µV (RMS) /< 4 mV (peak to peak) (meas.)
        R&S® HMC8041< 1 mV (RMS) /< 5 mV (peak to peak) (meas.)
      Current ripple and noise (20 Hz to 20 MHz)
        R&S® HMC8043< 1 mA (RMS) (meas.)
        R&S® HMC8042< 1 mA (RMS) (meas.)
        R&S® HMC8041< 1.5 mA (RMS) (meas.)
      Max SENSE compensation1 V (meas.)
      Programming accuracy (+23°C ±5°C)
      Voltage
        all models< 0.05% + 2 mV
      Current
        R&S® HMC8043< 0.05% + 2 mA
        R&S® HMC8042< 0.1% + 5 mA
        R&S® HMC8041< 0.2% +10 mA
      Readback accuracy (+23°C ±5°C)
      Voltage
        all models< 0.05% + 2 mV
      Current
        R&S® HMC8043< 0.05% + 2 mA
        R&S® HMC8042< 0.05% + 4 mA
        R&S® HMC8041< 0.15% + 10 mA
      Resolution
      Voltage
        all models1mV
      Current
        R&S® HMC8043I < 1 A: 0.1 mA
        R&S® HMC8042I ≥ 1 A: 1 mA
        R&S® HMC8041I < 1 A: 0.5 mA
      I ≥ 1 A: 1 mA
      Maximum voltage to ground 250 V DC
      Maximum counter voltage 33 V
      Meximum reverse voltage0.4 V
      Maximum reverse current3 A
      Supplemental characteristics
      Front connectors4 mm safety sockets
      Rear connectors Wago male connector (713-1428/037- 000), 8 x 2-pole, pin spacing 3.5mm / 0.138in
      Temperature coefficient
      ± (% of output + offset) (per °C)      		voltage: < 0.02% + 3 mV
      current: < 0.02% + 3 mA
      Output voltage overshoot during turn-off of AC power with activated channel output< 100 mV (meas.)
      Over temperature protectionyes
      Voltage programming time (within 1% of total excursion)
      Positive voltage change
        no load10 ms + command processing-time
        with resistive load10ms + command processing-time
      Negative voltage change
        no load 500ms + command processing-time
        with resistive load10ms + command processing-time
      Command processing time< 30ms (nom.)
      Over voltage protectionYes
      Over power protectionYes
      Energy MeterYes
      EasyRampYes
      EasyRamp time10ms to 10 s
      Electronic fuse
      Fuse response time< 10 ms (meas.)
      Response time of linked channels< 100 µs (meas.) + response time of linked channel
      Fuse delay10 ms to 10 s
      Analog control interface
      Control parametervoltage or current
      Current / shunt resistance4 mA to 20 mA / 250 Ω
      Input voltage / max. resistance0 V to 10 V / 10kΩ
      Acquisition rate V/I interface10 sample/s
      Maximum response time150ms
      Resolution14 bit
      Trigger input
      Trigger response time < 1ms (meas.)
      Min. trigger interval10 ms
      Input level TTL
      Edge directionrising, falling
      Arbitrary (EasyArb)
      ParameterVoltage, current, time
      Maximum number of points512
      Dwell time10 ms to 600 s
      Repetition ratecontinuous or burst mode
      with 1 to 255 repetitions
      Triggermanually, remote control or via trigger input
      TOP