產品明細

ZVL13

向量網路分析儀

    產品簡述
    ♦ 頻率範圍: 9kHz~13.6GHz
    ♦ 動態範圍: up to typ. 105dB
    ♦ 測試頻寬: 10Hz~500kHz
    ♦ 頻譜分析及功率計(選配)
    ♦ 支援完整S參數量測
    ♦ 可以多視窗顯示測試數據
      詢價

      產品詳細介紹Product Introduction

      The R&S®ZVL is ideal for lab applications where the measurement tasks vary frequently; it can be used to measure S-parameters as well as the output spectrum, ACP, and TOI without having to reconnect the device under test (DUT). With the R&S®ZVL, production lines can now be run even more flexibly, as the switchover from network analyzer to spectrum analyzer can easily be effected via remote control. Moreover, an NRP-Z power sensor, which can be directly connected to the R&S®ZVL, ensures precise power measurements.

      Features
      • Wide dynamic range for characterizing filters of high rejection
      • High power-handling capability of its receivers for analyzing active devices
      • Integrated step attenuator for measurements on devices with up to 27 dBm output power
      • Compact size for optimal utilization of the work space
      • Simultaneous display of all relevant DUT parameters for fast tuning
      • Possible connection of anR&S®NRP-Z power sensor for precise power measurement (R&S®FSL-K9 option)
      • Optional spectrum analysis with the R&S®FSL scope of functions
        • Channel and adjacent channel power measurement
        • Measurement of occupied bandwidth
        • CCDF measurement (amplitude statistics of signals)
        • 20 MHz I/Q demodulation bandwidth
      • Performance of sophisticated measurement tasks by offering network analysis, spectrum analysis, and power measurement in a single box
      • Convenient loading of instrument setups with pass/fail criteria from the hard disk or USB stick
      • Operation independent of AC supply due to an optional internal battery or 12 V car supply system
      • Easy transportation owing to compact size and low weight
      • Shock-resistant housing and ergonomic carrying handle
      • Carrying bag for accessories such as additional batteries, power sensors, and calibration standards

      Specifications in brief
      Network analysis
      Frequency rangeR&S®ZVL3, R&S®ZVL6:
      9 kHz to 3 GHz/6 GHz (specified)
      5 kHz to 3 GHz/6 GHz (unspecified)
      R&S®ZVL13:
      9 kHz to 13.6 GHz (specified)
      5 kHz to 15.0 GHz (unspecified)
      Measurement time (201 measurement points, full two-port- calibrated)< 75 ms
      Data transfer (201 measurement points)
        Via RSIB over 100 Mbit/s LAN1.5 ms
      Dynamic range at 10 Hz measurement bandwidth> 115 dB, typ. 123 Db
      Output power> 0 dBm, typ. +10 dBm
      Measurement bandwidths10 Hz to 500 kHz in 1/2/5 steps
      Weight (without battery)< 7 kg (15.43 lb)
      Number of channels, diagrams, and traces> 100 1)
      Number of measurement points per trace2 to 4001
      Operating systemWindows XP
      Spectrum analysis
      Frequency rangeR&S®ZVL3, R&S®ZVL6:
      9 kHz to 3 GHz/6 GHz (specified)
      5 kHz to 3 GHz/6 GHz (unspecified)
      R&S®ZVL13:
      9 kHz to 13.6 GHz (specified)
      5 kHz to 15.0 GHz (unspecified)
      Frequency uncertainty 1 × 10–6
        with ¸FSL-B4 option1 × 10–7
      Resolution bandwidths
        Standard300 Hz to 10 MHz in 1/3 steps, 20 MHz at zero span
        with ¸FSL-B7 option(1 Hz) 10 Hz to 10 MHz in 1/3 steps
      Video bandwidths10 Hz to 10 MHz
      I/Q demodulation bandwidth20 MHz
      SSB phase noise at 500 MHztyp. –103 dBc (1 Hz), 10 kHz carrier offset
      Displayed average noise level
        without preamplifier at 1 GHz< –140 dBm (1 Hz)
        with preamplifier at 1 GHz< –156 dBm (1 Hz), typ. –163 dBm (1 Hz)
      IP3> +5 dBm, typ. +12 dBm
      Detectorsmax/min peak, auto peak, RMS, quasi peak, average, sample
      Level measurement uncertainty (95 % confidence level)< 0.5 dB
      TOP