SG section |
RF output signal | Output method | DDS method |
| Frequency range | 100kHz ~ 170MHz |
| Setting resolution | 100 Hz |
| Frequency accuracy | ±5×10-6 |
| Output level range: Standard | -20dBμV ~ 126dBμV (EMF) |
| Output level range: Option | -20dBμV ~ 132dBμV (EMF) |
| Setting resolution | 0.1dB |
| Output level accuracy:standard | ±1.5 dB :0 ~ 126 dBμV (EMF) ±2.0 dB :-20 ~ 0 dBμV (EMF) |
| Output level accuracy:option | ±1.5 dB :0 ~ 132 dBμV (EMF) ±2.0 dB :-20 ~ 0 dBμV (EMF) |
| Output impedance | 50 Ω |
| VSWR | ≦1.3 |
| Spurious | Harmonics: ≦-30dBc/non-harmonic: ≦-40dBc |
| Residual FM | ≦-80dB(AF 1kHz, FM 75kHz) |
| Residual AM | ≦-55dB(AF 1kHz, AM 30%) |
| Leakage interference | Does not affect the performance at 0 dB μV output |
Attenuator | Harmonics Less than -30dBc |
RANGE OUT | Ext. relay drive signal output |
FM modulation | Frequency deviation | 0kHz ~ 135kHz |
| Setting resolution | 0.1kHz |
| Modulation accuracy | 10.7 MHz ±1 MHz : ± (setting×0.1+0.5) kHz 76 MHz ~ 108 MHz :± (setting×0.1+0.5) kHz 0.3 MHz ~ 170 MHz :± (setting×0.1+1) kHz |
| Distortion factor | ≦0.05%(10.7MHz ± 1MHz, 76 ~ 108MHz) ≦0.1%(0.3MHz ~ 170MHz) |
| Parasitic AM | ≦0.5%(10.7MHz ± 1MHz, 76 ~ 108MHz) (AF 1kHz, FM 75kHz) |
| Ext. modulation | Freq. range | 50Hz ~ 100kHz |
| | Freq. | ±1dB (1kHz ref.) |
| | Impedance | 10kΩ(unbalance) |
| | Input voltage | 1Vp-p ± 2% |
FM stereo modulation | Internal modulation | LEFT 10Hz ~ 100kHz, 1Hz Step RIGHT 10Hz ~ 100kHz, 1Hz Step Settings other than MONO mode ? 15kHz are not guaranteed |
| Modulation mode | MONO/L=R/L/R/L=-R/L&R/OFF |
| L,R separation | ≧ 55dB |
| Modulation factor setting range | 0 ~ 135%(75kHz/100%) |
| Setting resolution | 1% |
| Pilot setting range | 0 ~ 15% |
| Pilot setting resolution | 0.1% |
| ReemphasisPilot setting resolution | 25μs / 50μs / 75μs / OFF |
AM modulation | Moduation depth | 0 ~ 100% (≧120dB:30% Max) |
| Setting resolution | 0.1% |
| Accuracy | 0.4 MHz ~ 1.7 MHz ± ( setting× 0.1+1)% 0.15 MHz ~ 170 MHz ± ( setting× 0.1+2 )% AF 1kHz, Modulation factor ≦ 80%, RF output 126dBμV(EMF) |
| Distortion factor | RF frequency (MHz) | Modulation factor |
| | | 0 ~ 30 % | 30.1 ~ 60 % | 60.1 ~ 80% |
| | 0.4 ~ 1.7 | ≦0.5 % | ≦1.5 % | ≦3.0 % |
| | 0.15 ~ 170 | ≦1.5 % | ≦3.0 % | ≦5.0% |
| | | However, RF output level: 100 dBμV (EMF) |
| Internal modulation frequency | 10Hz ~ 20kHz,1Hz Step |
| Ext. modulation | Freq. range | 50Hz ~ 20kHz |
| | Freq. characterisitcs | ± 1dB (1kHz Ref.) |
| | Impedance | 10k Ω (Unbalance) |
| | Input voltage | 1Vp-p ± 2% |
General |
Interface | HDMI × 1 / LAN(TCP/IP, 10/100 Base-T)× 1 USB-A × 3 / USB-B × 1 |
Rated power voltage | AC100V ~ 240V 50/60Hz |
Power consumption | Approx. 20VA |
External dimensions, weight | 240(W) × 100(H) × 385(D) mm, approx.4 ㎏ |
Performance guaranteed condition | 10℃~ 35℃,5%~ 85% RH(no dew condensation) |
Storage condition | -10℃~ 50℃,5%~ 95% RH(no dew condensation) |