產品明細

NGE100B

直流電源供應器

    產品簡述
    ♦ NGE102B(雙通道)或NGE103B(三通道)
    ♦ 最大功率: 66W(NGE102B), 100W(NGE103B)
    ♦ 每通道最大輸出電壓: 32V
    ♦ 電子保險絲(OCP), 過電壓保護(OVP), 過功率保護(OPP), 過熱保護(OTP)
    ♦ 透過USB(VCP/TMC), LAN(LXI), Wireless LAN等介面進行遠端控制
      詢價

      產品詳細介紹Product Introduction

      Reduced to the max

      The R&S®NGE100B power supply series consists of robust, high-performance, affordable instruments. They offer high efficiency combined with low ripple plus a variety of comfort functions that are not usually found in this class of power supplies.
      The R&S®NGE100B power supply series consists of the R&S®NGE102B two-channel power supply and the R&S®NGE103B three-channel power supply. Both instruments provide up to 33.6 W output power per channel. Unlike most power supplies in this class, the R&S®NGE100B power supplies feature 100% electrically equivalent output channels. All outputs are earth-free and short-circuit-proof. The output channels can be combined in serial or in parallel to achieve higher voltages or higher currents (up to 96 V or up to 9 A using all three channels of the R&S®NGE103B). All basic functions of the R&S®NGE100B power supplies can be operated via direct keys on the front panel. The rotary knob plays the central role in adjusting the voltage and current and setting the limits for the multipurpose protection functions. The operating conditions of all channels are displayed on the screen simultaneously. Active channels are indicated by the illuminated channel key. Active outputs are shown in green when working in constant voltage mode and in red when working in constant current mode. Inactive outputs are displayed in white.
      To safeguard the instrument and the device under test (DUT), the R&S®NGE100B power supplies provide a variety of protection functions. For each channel, users can separately set the maximum current (electronic fuse, overcurrent protection, OCP), the maximum voltage (overvoltage protection, OVP) or the maximum power (overpower protection, OPP). If such a limit is reached, the affected output channel will be switched off. Overtemperature protection (OTP) prevents overheating of the instrument. In industrial applications, power supplies are often installed in 19" racks. The R&S®HZC95 rack adapter allows the power supplies to be mounted in racks, including in combination with R&S®HMC test instruments. The R&S®NGE100B power supplies can be remotely controlled via USB or optionally via Ethernet or even via wireless LAN.

      Available models
      ModelsNumber of output channelsMax. output powerOutput voltage per channelOutput current per channel
      R&S®NGE102B266 W0 V to 32 V0 A to 3 A
      R&S®NGE103B3100 W0 V to 32 V0 A to 3 A
      Features
      • R&S®NGE102B with two or R&S®NGE103B with three channels
        • Max. output power of 66 W with R&S®NGE102B, 100 W with R&S®NGE103B (33.6 W per channel)
        • Max. output voltage of 32 V per channel (up to 64 V/96 V in serial operation)
        • Max. output current of 3 A per channel (up to 6 A/9 A in parallel operation)
        • Electronic fuse (OCP), overvoltage protection (OVP), overpower protection (OPP), overtemperature protection (OTP)
        • USB interface (CDC/TMC), optional LAN (LXI), optional wireless LAN
        • Optional digital I/O (4 bit)

      • Meets your daily needs
        • All channels galvanically isolated and earth-free
        • All channels electrically equivalent with the same voltage, current and power
        • Parallel and serial operation
        • Short-circuit-proof outputs
        • Protection functions to safeguard instrument and DUT
        • Modern architecture; small, compact and quiet
        • Tailored to be used in education, labs and system racks

      • Easy operation
        • Straightforward operation
        • Color-coding of operating conditions
        • Comfort features for special applications
        • Tracking and link functions
        • Five memory keys to save/recall instrument settings

      • Connectivity – everything you need
        • Front connectors with 4 mm safety binding posts
        • USB interface (virtual COM port and TMC class)
        • LAN interface (LXI) with integrated web server (R&S®NGE-K101 option)
        • Wireless LAN, unique in this class (R&S®NGE-K102 option)
        • Digital trigger in/out (4 bit) on the rear (R&S®NGE-K103 option)

      Specifications
      Electrical specifications
      OutputsAll channel outputs are galvanically isolated and not connected to ground.
      Number of output channels R&S®NGE102B2
      R&S®NGE103B3
      Total output power R&S®NGE102Bmax. 66 W
      R&S®NGE103Bmax. 100 W
      Maximum output powerper channel33.6 W
      Output voltageper channel0 V to 32 V
      Maximum output currentper channel3 A
      Maximum voltage in serial operationR&S®NGE102B64 V
      R&S®NGE103B96 V
      Maximum current in parallel operationR&S®NGE102B6 A
      R&S®NGE103B9 A
      Voltage ripple and noise20 Hz to 20 MHztyp. < 1.5 mV (RMS)
      < 20 mV (peak-to-peak) (meas.)
      Current ripple and noise20 Hz to 20 MHz< 2 mA (RMS) (meas.)
      Load regulationload change from 10% to 90%
      Voltage± (% of output + offset)< 0.1% + 20 mV
      Current± (% of output + offset)< 0.1% + 5 mA
      Load recovery time10% to 90% load change within a band of ± 30 mV of set voltage < 200 µs (meas.)
      Line regulation±10% change in mains voltage
      Voltage± (% of output + offset)< 0.1% + 20 mV
      Current± (% of output + offset)< 0.1% + 5 mA
      Output voltage overshoot at turn-off of mains power and active channel output< 100 mV
      Programming resolution
      Voltage10 mV
      Current1 mA
      Programming accuracy
      Voltage± (% of output + offset)< 0.1% + 30 mV
      Current± (% of output + offset)< 0.1% + 5 mA
      Output measurements
      Measurement functionsvoltage, current, power
      Readback resolution
      Voltage10 mV
      Current1 mA
      Readback accuracy
      Voltage± (% of output + offset)< 0.1% + 20 mV
      Current± (% of output + offset)< 0.1% + 5 mA
      Temperature coefficient +5°C to +20°C and +30°C to +40°C
      Voltage± (% of output + offset)< 0.02% + 5 mV per K
      Current± (% of output + offset)< 0.02% + 3 mA per K
      Ratings
      Maximum voltage to earth 150 V DC
      Maximum counter voltagevoltage with same polarity connected to the outputs33 V
      Maximum reverse voltagevoltage with opposite polarity connected to the outputs0.4 V
      Maximum reverse current3 A
      Remote control
      Command processing time≤ 30 ms
      Programming settling timewithin 1% of final value
      Positive voltage changeno load10 ms + command processing time
      full load (resistive)10 ms + command processing time
      Negative voltage changeno load500 ms + command processing time
      full load (resistive)10 ms + command processing time
      Protection functions
      Overvoltage protectionconfigurable for each channel
      Overpower protectionconfigurable for each channel
      Overcurrent protection (electronic fuse)configurable for each channel
      Response time(Iload > Iresp × 2)< 10 ms
      Fuse linking (FuseLink function)Yes
      Response time of linked channels< 100 µs + response time of linked channel
      Fuse delayconfigurable for each channel10 ms to 10 s (10 ms increments)
      Overtemperature protection Yes
      Special functions
      Output ramp functionEasyRamp
      EasyRamp time10 ms to 10 s (10 ms increments)
      Arbitrary functionEasyArb
      Parameter voltage, current, time
      Maximum number of points128
      Dwell time10 ms to 600 s (10 ms increments)
      Repetitioncontinuous or burst mode with 1 to 255 repetitions
      Triggeroptional (R&S®NGE-K103)manually, remote control or via optional trigger input
      Trigger and control interface optional (R&S®NGE-K103) digital I/O
      Minimum trigger interval10 ms
      Trigger response time< 150 ms
      Trigger levelTTL, max. 5 V
      Edge directionrising, falling
      Display and interfaces
      Display3.5"/QVGA
      Front panel connections channel outputs4 mm safety binding posts
      Remote control interfaces StandardUSB-TMC, USB-CDC (virtual COM)
      optional (R&S®NGE-K101) LAN (LXI)
      optional (R&S®NGE-K102)wireless LAN 802.11 b/g/n, 2.4 GHz; operating mode: client
      Trigger and control interface optional (R&S®NGE-K103)digital I/O
      General data
      Environmental conditions
      Temperatureoperating temperature range0°C to +40°C
      storage temperature range–20°C to +70°
      Humiditynoncondensing5% to 80%
      Power rating
      Mains nominal voltage115 V/230 V (± 10%)
      Mains frequency50 Hz/60 Hz
      Maximum power consumption 180 W
      Mains fuses115 V AC power sourceIEC60127-2/5 T 5 A 250 V
      230 V AC power source IEC60127-2/5 T 2.5 A 250 V
      Product conformity
      Electromagnetic compatibilityEU, in line with EU RE Directive 2014/53/EU (notified body: CTC advanced GmbH)applied standards:
      EN61326-1, EN61326-2-1,
      DRAFT EN301489-1 V 2.2.0,
      DRAFT EN301489-17 V 3.2.0,
      EN300328 V 2.1.1,
      47 CFR FCC part 15B (class A),
      and ICES-003 issue 6
      KoreaKC mark
      Electrical safetyEU, in line with Low Voltage Directive 2014/35/EUEN61010-1
      USAUL 61010-1
      CanadaCSA C22.2 No. 61010-1
      Wireless LAN certificationsAustria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, United KingdomCE
      SingaporeiMDA standards DB102020
      United States, CanadaFCC, IC
      RoHSEN50581, in line with EU directive 2011/65/EU
      International safety approvals cTUVus markcertificate no. U8 18 04 87787 008
      Mechanical resistance
      VibrationSinusoidal5 Hz to 55 Hz, 0.30 mm (peak-to-peak) amplitude const., 55 Hz to 155 Hz, 0.5 g const., in line with EN60068-2-6
      Random8 Hz to 500 Hz, 1.2 g (RMS), in all three axes, in line with EN60068-2-64
      Shock10 Hz to 45 Hz, ramp 6 dB/octave, 45 Hz to 2000 Hz: max. 40 g in line with MIL-STD-810E
      Mechanical data
      DimensionsW × H × D222 mm × 97 mm × 310 mm
      (8.74 in × 3.82 in × 12.21 in)
      WeightR&S®NGE102B4.9 kg (10.80 lb)
      R&S®NGE103B5.0 kg (11.00 lb)
      Rack installationoptional (R&S®HZC95)½ 19"
      Recommended calibration interval operation 40 h/week in the full range of the specified environmental conditions1 year
      TOP