產品明細

MRD4400

模組式解碼器

    產品簡述
    ♦ 輸入信號:
      - ASI, MPEG/IP, DVB-S/S2/S2X, TuboPSK
      - 8VSB/QAM-B, DVB-T/T2, C/C2 & ISDB-T
    ♦ 輸出信號: SD/HD-SDI, HDMI & Composite Output
    ♦ Video解碼: HEVC/H.264/MPEG2
    ♦ Audio解碼:
      - Dolby AC3/Plus EAC3
      - AAC-LC, HE-AAC/v2, MPEG-1/2 L2
      - Linear PCM & Dolby E(Pass-through)
    ♦ 支援4 Audio services解碼
      詢價

      產品詳細介紹Product Introduction

      The MRD 4400 Receiver Decoder is the latest in Sencore’s long line of professional integrated receiver/decoders for distribution and monitoring applications. Latest-generation components ensure that the MRD 4400 provides the most complete feature set and the best value for a broad swath of common receiver/decoder applications. The product supports decoding of SD or HD video, encoded as HEVC, H.264 or MPEG-2, as well as up to four audio services.

      The additional audio handling capability makes the MRD 4400 the perfect solution for video distributors looking to meet upcoming descriptive video requirements, while continuing to support surround, stereo, and SAP services. As customer demands evolve, units purchased for SD decoding can be upgraded to HD via a simple software license, and with the included digital video output, video monitoring is as easy as finding the nearest standard consumer television or PC monitor.

      With built-in ASI input/output capability, as well as available satellite and IP interfaces, the MRD 4400 is adaptable to most decoder use cases. The receiver also maintains Sencore’s long tradition of ease of use, with a web interface accessible via all major browsers and complete control of the unit via the front panel keypad, and is backed by Sencore’s best-in-class ProCare support.


      Features

      • Support for All Common Video Formats
        • HEVC, H.264, MPEG-2 HD or SD video
        • All formats auto-detected and switchable on-the-fly
      • Up to 4 services of audio decoding or SDI pass-through with support for all major audio formats
      • Dual SDI auto-switching outputs
      • Built-in ASI I/O for maximum value and flexibility
      • Available 8VSB/QAM-B, IP, RF satellite and DVB-T/T2/C/C2/ISBD-T inputs
      • Full complement of ancillary data output in ANC and VBI
      • Closed-caption or auto-scaling subtitle overlays for monitoring or burn-in applications
      • Intuitive, straightforward web interface
      • Full control, status, and alarm monitoring via SNMP
      Applications
      • Turn-around and Back-haul Distribution Feeds
        • Receive network and live feeds via RF, ASI, or IP, and simultaneously demodulate, de-encapsulate, encapsulate, and decode for local processing and reencode requirements
      • Upgrade Existing Installations
        • Replace existing receiver decoders to meet emerging video distribution challenges, including the need for more audio services or the transition to HEVC. Experience industry-leading ease of use and interoperability coupled with low cost of ownership.
      • Monitor Any Video Feed
        • Leverage quick set-up and automatic, decode-anything operation to monitor video feeds operationally or in an engineering lab.
      Specifications
      AVAILABLE VIDEO DECODER MODULES
      MRD 44041ASI I/O, SDI and Analog Outputs, Discrete Audio, Genlock Support
      MRD 44040ASI I/O, SDI and Analog Outputs, Discrete Audio
      MRD 44001ASI I/O, SDI Outputs, and Genlock Support
      MRD 44000ASI I/O and SDI Outputs
      Additional Discrete Interfaces (available on MRD 44041 and 44040)
           Composite Video Output:1x 75Ω BNC
      NTSC, PAL-B/G/I/D/M/N
           AES Audio Outputs:4x 75Ω BNC
           Analog Audio Outputs:2x 15 pin D-Sub (4 Stereo Services)
      4x XLR Breakout Cable Available
      4x BNC Breakout Cable Available
      Terminal Block Cable Available
      Genlock Interface (available on MRD 44041 and 44001)
           Genlock Input:1x 75Ω BNC
      COMMON VIDEO DECODER FEATURES
      Base Decoding (SD 4:2:0)
      Video Profile/Levels:MPEG2 MP@ML
      H.264 up to MP@L3
      HEVC Decode License     MRD 44765
      Enables HEVC Decoding:Requires MRD 44265 Option
      HD Decoding License     MRD 44710
      Additional Profile/Levels:MPEG2 MP@HL
      H.264 up to HP@L4.2
      HEVC up to MP@MT L4 (with License)
      Additional Output Formats:1920x1080i @ 25, 29.97, 30
      1920x1080p @ 23.97, 24, 25, 29.97, 30
      1280x720p @ 50, 59.94, 60
      Additional Base Video Features
      Frame Synchronization Modes: PCR-Recovered Clock
      Genlock Reference (if equipped)
      Aspect Ratio Conversion
           Manual Selection:Letterbox, Center-Cut, Anamorphic
           Automatic Selection:Follows AFD Codes
      Output Formats:720x576i @ 25
      720x480i @ 29.97
      Output Interfaces:
           SD/HD-SDI:2x 75Ω BNC
           SDI Format Support:Determined by Decode License
           Digital Video:1x HDMI-type Connector
      Simultaneous SD Video Output Module      MRD 600
           Mirrored SD SDI Outputs:2x 75Ω BNC
           Composite Video Output:1x 75Ω BNC
      NTSC, PAL-B/G/I/D/M/N
      Simultaneous SD Video Output Module with Genlock     MRD 601
           Mirrored SD SDI Outputs:2x 75Ω BNC
           Composite Video Output:1x 75Ω BNC
      NTSC, PAL-B/G/I/D/M/N
      HEVC Decoding Daughter Board     MRD 44265
      Enables HEVC Licensing:Requires MRD 44765 License for decoding functionality
      Video Overlay Support
      Closed Caption Overlays:CEA-608, CEA-708, or SCTE-20
      DVB-Subtitle Overlays:HD/SD with Auto Scaling (EN 300743)
      Image Overlay:JPEG or PNG up to 4MB Triggered Manually, on Decode Failure, or by SCTE35
      Base Audio Decoding Features
      Number of Audio Services:2 Standard, Up to 4 Available
      Audio Codecs Supported:Dolby Digital (AC-3) & Plus (EAC-3)
      AAC-LC, HE-AAC, & HE-AACv2
      MPEG1L2 & MPEG2L2
      Linear PCM & Dolby E (Pass-through)
      Output Formats: Digital Pass-through
      PCM (Downmixed for 5.1 Sources)
      Analog (Downmixed for 5.1 Sources)
      Discrete Channel Audio Output License     MRD 44851
      Adds Output Formats:PCM (Decoded Discrete channels for 5.1 Sources)
      Analog (Decoded Discrete channels for 5.1 Sources)
      4 Service Audio Decode License     MRD 44840
      Additional Audio Services:2 Services (Total of 4 Services)
      Base Audio Output Features
      SDI Embedded Audio Output:4 Audio Pairs
      Ancillary Data Support
      SDI ANC Data Types:AFD (SMPTE 2016)
      Closed Captions (CEA-708)
      OP-47 (SMPTE RDD-08)
      SMPTE RDD-11 SCTE 127 (SMPTE 2031)
      EN301775 (SMPTE 2031)
      Time Code (SMPTE 12M-2)
      SCTE 104 (SMPTE 2010 with License)
      VBI Waveforms (SDI/Composite):Line 21 Captions (CEA-608)
      TVG2X, AMOL-48/96 (SCTE-127)
      Teletext/WSS/VPS (EN301775)
      SCTE 35 to SCTE 104/Relay Output License     MRD 44992
      Cablelabs ESAM POIS Interface License     MRD 44993
      Included Transport Stream Input/Output Features
      ASI Input/Output:2 x 75Ω BNC
      Supported Bitrate:250 Kbps to 200 Mbps
      BISS-1 Descrambling License     MRD 44921
      Supported Modes:Mode 0, Mode 1 with Session Word
      Mode E with SW and Injected ID
      Multi-BISS Support:Up to 12 Separate Keys
      BISS-2/CA Descrambling License     MRD 44922
      Supported Modes:Mode 0, Mode 1 with Session Word
      Mode E with SW and Injected ID
      Mode CA with Injected Private Key
      Mode CA with Buried Private Key
      Multi-BISS Support:Up to 12 Separate Keys
      DVB-CI Multi-Service License     MRD 44991
      With DVB-CI Module: Enables Multi-service Descrambling
      PID/Service Filtering License     MRD 44928
      Filtering:5 Independent TS (MPTS or SPTS) outputs via IP or ASI
      Table Regeneration (DVB Mode) :PAT regeneration
      Table Pass-through (DVB Mode):PMT, CAT, NIT pass-through Table
      Regeneration (DVB Mode):PAT, SDT
      Table Pass-through (DVB Mode):PMT, CAT, NIT, EIT, RST, TDT, TOT
      DVB-CI DESCRAMBLING MODULE     MRD 421
      Physical Interface:Adds two DVB-CI CAM Slots
      Without Multi-Service License:Descrambles Decoded Service Only
      With Multi-Service License:Number of Services limited by CAM
      IP INPUT/OUTPUT MODULE     MRD 127
      Physical Interface: 2x RJ45, 10/100/1000 Auto-Negotiate
      Input Format:UDP or RTP
      Constant Bitrate or Null-Stripped
      RTP Header Extensions Supported
      SMPTE 2022/CoP3 FEC Supported
      Output Format:UDP, RTP (with License)
      MPE De-encapsulation:Up to 2 PIDs
      Up to 60Mbps per MPE PID
      IP Encapsulation:1 to 7 TS Packets per IP Packet
      Addressing:Unicast or Multicast
      IGMP compatibility:Version 1, 2 & 3
      Per TS Bitrate:250 Kbps to 200 Mbps
      MPEG/IP FEC Output License     MRD 44925
      Additional Output Formats: RTP and Header Extensions
      SMPTE 2022/CoP3 FEC Supported
      DVB-S/S2 INPUT MODULE     MRD 116
      Physical Interface:4x 75Ω F-Type
      Frequency Range:950-2150 MHz
      Symbol Rates:1-45 MSps
      DVB-S Modulation Modes:QPSK (All FEC Rates)
      DVB-S2 Modulation Modes:QPSK/8PSK (All FEC Rates)
      16/32APSK (with License)
      LNB Power:Off/13/14/18/19VDC @ 450Ma
      Control Tone Support:22 kHz On/Off
      Supported Roll-off Factors:0.35, 0.25, 0.20, 0.15, 0.10, 0.05
      DVB-S2 Advanced Feature License     MRD 44916
      Additional Modulation Modes:16/32/64APSK (All FEC Rates)
      VCM Demodulation Support
      Multistream Support (Single ISI)
      DVB-S/S2/S2X INPUT MODULE     MRD 116A
      Physical Interface:4x 75Ω F-Type
      Frequency Range:950-2150 MHz
      Symbol Rates:1-72 MSps with 8PSK/QPSK
      1-60 Msps with 16APSK and higher
      DVB-S Modulation Modes:QPSK (All FEC Rates)
      DVB-S2/S2X Modulation Modes:QPSK/8PSK (All FEC Rates)
      16/32/64APSK (with License)
      LNB Power:Off/13/14/18/19VDC @ 450mA
      Control Tone Support:22 kHz On/Off
      Supported Roll-off Factors:0.35, 0.25, 0.20, 0.15, 0.10, 0.05
      DVB-S2/S2X Advanced Feature License     MRD 44916
      Additional Modulation Modes:16/32/64APSK (All FEC Rates)
      VCM Demodulation Support
      Multistream Support (Single ISI)
      8VSB/QAM-B INPUT MODULE      MRD 101
      Physical Interface:75Ω F-Type
      Frequency Range:50-1000 MHz
      Sensitivity:-34 to +40 dBmV (A74 Compliant)
      8VSB Standard:ATSC A/53E
      8VSB Channel Plans:Broadcast
      QAM Standard:ITU Annex B/SCTE DVS-031
      QAM Channel Plans:FCC, IRC, HRC
      QAM Constellations:QAM64, QAM256
      BROADCOM TURBOPSK INPUT MODULE     MRD 111
      Physical Interface:1x 75Ω F-Type
      Frequency Range:950-2150 MHz
      Symbol Rates:1-30 Msps
      DVB-S Modulation Modes:QPSK (All FEC Rates)
      TurboPSK Modulation Modes:QPSK /8PSK (All FEC Rates)
      DVB-T/T2/C/C2/ISDB-T INPUT MODULE     MRD 115
      Physical Interface:1x 75Ω F-Type
      Frequency Range:42-1002 MHz
      Bandwidth:1.7MHz, 5 MHz, 6MHz, 7MHz, 8MHz
      Constellations:
      DVB-T: QPSK, QAM16, QAM64 (All FEC Rates)
      DVB-T2:QPSK, QAM16, QAM64, QAM256 (All FEC Rates)
      DVB-C:QAM16, QAM32, QAM64, QAM128, QAM256 (All FEC Rates)
      DVB-C2:QAM16, QAM64, QAM256, QAM1024, QAM4096 (All FEC Rates)
      ISDB-T:QPSK, QAM16, QAM64 (All FEC Rates)
      MANAGEMENT
      Connector: RJ-45 10/100 - Auto Negotiating
      Protocols: HTTP and SNMP
      User Interfaces: Full control via web GUI
      Full control via front panel
      Automation Interfaces:Full status and control via SNMP
      Configurable SNMP traps
      Web services API available
      Syslog message logging
      Firmware Updates:Via Web GUI
      Authentication:Local Login, TACACS+
      DIMENSIONS/POWER
      Height:1 RU, 1.72” (44 mm)
      Width:1 RU, 17.2” (437 mm)
      Depth: 14.6” (370 mm)
      Power:100-240 VAC 50/60 Hz
      Supply Options: Single AC Power Supply (Standard)
      Dual AC Power Supply
      ENVIRONMENTAL CONDITIONS
      Operating Temp:0° to 50°C
      Storage Temp:-40°C to 65°C
      Relative Operating Humidity:<95% (non-condensing)
      TOP