產品明細

VB242

ASI監控模組

    產品簡述
    ♦ 須安裝一個VB120或VB220控制模組,最多再安裝2個VB242模組
    ♦ 每個VB242模組可提供6個獨立的ASI輸入接口
    ♦ 每個機框共有13個 ASI輸入,5個TR290分析引擎*
    ♦ VB242 ASI兩種監控模式:
      - 2個TR290分析引擎,同時分析2個ASI輸入
      - 6個 ASI輸入輪循,分析TR290 錯誤
    ♦ 支援DVB-ASI and M2S,188 & 204 byte packet length
    *(每個VB242模組有2個引擎, 一個VB120或220有1個引擎)
      詢價

      產品詳細介紹Product Introduction

      The VB242 ASI input option card allows operators realtime high density ASI monitoring or switched ASI roundrobin monitoring for remote or head-end applications. With up to 13 ASI inputs in a 1 RU chassis in combination with the VB220 or VB120 controllers, the VB242 is perfect for existing infrastructures in the head-end and the regional edge-multiplexer/ modulator/ transmitter site.

      The VB242 complements the already extensive range of input interfaces for the VideoBRIDGE series probes. The VB242 interface module can operate in two different modes: either two of the inputs are monitored full time with continuous ETSI TR 101 290 analysis, or its six inputs are sequentially monitored in a round-robin fashion.

      Using two VB242 interface modules in a 1RU chassis allows full time monitoring of five ASI streams in parallel – two streams from each of the interface modules and one stream from the ASI input of the controlling VB120 or VB220 probe. This high density solution is very useful for monitoring in head-ends where ASI infrastructure is used. It is also possible to combine a VB242 with a different input interface module, for instance one of the demodulators in the VideoBRIDGE interface product range.

      Features
      • 6 ASI inputs
      • DVB-ASI and M2S supported, 188 and 204 byte packet length
      • 50Ω female BNC connectors
      • Sync status LEDs for all inputs
      • Full ETSI TR101 290 monitoring (Priority 1/2/3)

      Applications
      • Providing broadcasters with complete monitoring of ASI signals being sent to transmitters or satellites
      • Allowing multi-channel service providers to monitor the ASI outputs from banks of satellite receivers
      • Tracing ingested signals to all parts of a network to quickly isolate problems and see the effects of network components

      Specifications

      • ASI INPUTS
        • BNC Connector: female
      • MECHANICAL
        • Standard 19” 1RU rack-mount
        • Compatible with ACC/DCC IRU chassis
      • ENVIRONMENT SPECIFICATIONS
        • Operating temperature: 0°C to 45°C
        • Storage temperature: -20°C to 70°C Operating humidity: 5% to 95% non-condensing
      • ​​​​​​​ ​​​​​​​​​​​​​​CONTROL AND MANAGEMENT
        • Fully controlled through backplane Accessible through master VB120 or VB220 user interface ​​​​​​​​​​​​​​
      • POWER SUPPLY REQUIREMENTS
        • Draws power from backplane
        • Maximum 5W dissipated per card S
      TOP